China Sample Concentrator

The instrument consists of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in a bolck . The gas at 5 to 10 psig passes through the distribution manifold. Depending on the test-tube size and solvent volume they can be individually raised or lowered to the correct height. Needles or glass pipets blow gas onto the surface of the solution resulting in rapid evaporation of the solvent. All materials used are laboratory quality and can withstand contact with organic solvents. Acid resistant models are available for corrosive application
Features
1. High precision and wide range of temp control
2. Blowing a large number of samples at one time
3. Blowing each sample independently
4. Amount of airflow can be adjusted
5. Easy operation; safe and reliable to use
Specification
1.Temp. range: room temp. +5~150ºC
2.Temperature control discrepancy: <= ±0.5ºC (RT+5ºC~150ºC)
<=±1ºC (100ºC ~ 150ºC)
3. Low Nitrogen consumption of 330ml/min/sample
4. Time required for temperature to increase from 40ºC to 150ºC: <=30min
5 .Maximum input power: 400W
6. Temp. control discrepancy: ± 0.1ºC
7. Dimensions: 280W x240D x 500H
8. Net weight: 7.5Kg
9. All units will fit and are recommended to be used in a bench-top.ventiated hood
10. Needles length: 150mm
11. Standard Blocks: See "Blocks for MD200"
Blocks for MD200

TypeParameterCapcityDimension (mm)BK016 mm 4996 x 96 x 49 BK027 mm 4996 x 96 x 49 BK0310 mm 25 96 x 96 x 49BK0412 mm2596 x 96 x 49BK0513 mm 25 96 x 96 x 49BK0615 mm1296 x 96 x 49BK0715 mm 16 96 x 96 x 49BK0816 mm1296 x 96 x 49BK0916 mm 16 96 x 96 x 49 BK1019 mm1296 x 96 x 49BK1119 mm 16 96 x 96 x 49 BK1220 mm996 x 96 x 49 BK1326 mm996 x 96 x 49 BK1428 mm496 x 96 x 49 BK1540 mm496 x 96 x 49 BK160.5 ml4996 x 96 x 49 BK171.5 ml 2596 x 96 x 49 BK182.0 ml2596 x 96 x 49