China Sanitary Negative Pressure Pump Factory

Specifications :

1)Application:Belong to a turbine the diversion centrifugal pump can

extract the liqiud of the vacuum tank under the pressure of negative pressure 0.09Mpa .

2)Spec:3T-180T,0.75KW-75KW

Material:SUS304SUS316L

the pump body,pump cover,impellerwhich is contact with medium material ,made of stainless steel SUS316L and SUSI304

Standard:DIN, SMS

Impeller:Open type impeller ,semi-close type impeller

Surface treatment:The parts contacted with medium is polished

Working condition;sanitary centrifugal pumps is a high and low level transmission ,as well as the level transmission ,

and has a amount of suction .

The max pressure of inlet:0.5MPa

Temperature range:-10°C to +140°C(EPDM)

washable mechanical sealing:

water pressure:Max 0.1MPa

3)Motor:

1. Configuration of "ABB" brand three-phase AC motor is in accordance with the International Electro-technical CommissionIEC60034.IEC60072 standard design comply with European "CE" marking requirements

2. The explosion-proof motor also available ,that can meet with the requirement of different applications .

3.It with excellent electric performance ,and with low noise,low vibration,

the protection grade is IP55,insulation grade is F.

4 .Operate in voltage:

≤3Kw,220-240V/380-420V,/Y

≥3Kw,380-420V/660-690V, /Y

5.frequency:50Hz/60Hz

6. working method:continuous(SI)

7.rotate speed:the standard rotate speed is 2900r/min

4)Instruction of the YUY sanitary negative pressure pump

For example:

YUY-F- B-2.2- 10- 24- M