1. Dry sawdust, rice hull, wheat straw, corn stalks
2. High Capacity
3. Moisture from 35-45% to 8-12%.
4. Fuel for the furnace: Wood waste, coal, waste oil and so on.
5. Single furnace support energy.
Introduction:
Hot air current dryer on a small scale, the simplest and most cost effective way to dry biomass/wood particles is with hot air current dryers, which are also commonly referred to as pipe dryers, at the start of the dryer is the hot air stove. The stove can use waste wood, logs, briquettes or pellets to generate the hot air required for drying, a fan is used to create the required suction through the pipe net work. The raw materials particles are entered at the start of the pipe work system, and the fan pulls the hot air and particles, which are suspended in the hot air stream, from the stove through the pipe network to the cyclone separator.
Working principle:
In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and materials suspending in air stream, the heat transfer surface between air and raw material is large, so the heat transfer rate is high.
The HGJ series dryer has the feature of low cost and high efficiency. It can reduce moisture from 40-45% to 8-12%.
The durable dryer machine works with high efficiency and gains more good reputation from European users.
Application:
It is special suitable for drying heat sensitive material like sawdust, rice hull, milled wheat straw, milled cotton / corn stalks and so on. It also can be used for drying the grain better.
ModelHGJ-IIICapacity-kg/h800-1000Diameter of raw-mm< 3mm & < 5mmAir temperature-° C180° C~250° CCentrifugal power-Airlock power-kw7.5Material in feed20mmConsumption-kg/h25-30kg/hWeight/kg4500Dimension-meter50*0.95*2.7Moisture-max-° C35-45Dried-max-° C3-10