China Sawdust Pulverized Charcoal Coal Rod Making Machine Briquette Press Equipment

Product Description
1.Equipment Introduction
1.Coal rod machine is a machine for making pulverized raw coal into different shape bar. Its working principle is: the motor through the triangular belt to the transmission, transmission output shaft through the floating coupling of the power to the propulsion shaft, the propulsion shaft on the push to push the coal pushed out through the molding die head, will produce the ideal high-pressure coal rod.
2.This machine is used to make sawdust into half-charcoal stick. It is equiped with the auto-controlling heating system. The product of this machine can be used to heat boiler, fireplace, etc for warm in house. Using the inherent characteristics of wood raw materials, through the screw extrusion, high temperature, high pressure, the wood raw material to make micro-fiber lignin plastics combine to form a fuel rod.
2.Structural features of coal rod machine
1. Large feed spiral lead, fast feed, small advance spiral lead, saving power.
2, shaft block and cylinder block with rigid connection, high concentricity, anti-thrust, stable machine.
3. The sealing part shall adopt the fault structure, and the dirt will leak out from the fault layer.
4, triangle belt transmission, smooth operation, low noise, and its overload protection.
5, the head and the cylinder body are connected with a clip ring structure, bolt structure, according to the user needs to choose and set.
3.Features of wood sawdust charcoal briquette extruder machine:
1.Reasonable design, reliable quality, simple structure, easy to operate, manpower saving, power saving.
2.Full automatic control electric heating device, randomly adjust the dry humidity of materials, guarantee the stability of the material forming, improve work efficiency.
3.Main parts adopt wear-resisting material through special processing, production
continuously, durable.
4.Suitable for all kinds of biomass raw material forming, low energy consumption, high production efficiency.
5.Increasing pitch increasing feed rate, thus greatly increased the production.
6.Improved the structure of molding drum, reduced the mechanical and the friction of the raw materials, increase the density of the mandrel.
7, adopts hard tooth face reducer , small size, and high bearing capacity
8, The internal impeller blade of Coal rods extruder adopts the thick impeller design; the impeller and cylinder lining board adopts wear-resistant materials;
9,The life span is 4-5 times longer than the ordinary material.
10,The exit of the coal rods in the head part adopts replaceable wear resistance alloy steel, which is easy to exchange.
Technical Parameter

ModelMotorproduction capacitySpeed of MainshaftForming SpecificationsBC-140

Y160m-411kw

Y160l-415kw

1-2 T46-60 r/min20-40mmBC-180

Y180m-418.5kw

Y180l-422kw

2-3 T39-60 r/min20-60mmBC-220

Y200l-430kw

Y225s-437kw

3-4 T 35-60 r/min20-80mmBC-300

Y225s-437kw

Y225m-445kw

4-6 T20-80 r/min20-80mmBC-400Y315m-4160kw6-10 T20-80 r/min20-80mm

Detailed Images

Raw Materials: (water content lower than 12%) Sawdust, charcoal ,coal rice husk ,stalk smaller than Length 5mm. Diameter 3mm
What kind of materials can be used for this machine:
Coal/charcoal powder from coal ash, coal mud, coke powder, coking coal and other kind of coal and charcoal. If the size of these materials is too big, you need to crush them into less than 3mm. If your raw materials have big size, it is difficult to press and shape in the process of making sticks,
Any kind of agro-wastes: Such as rice husks, crop stalks, wheat brans, groundnut shells, paddy straw, coffee shells, palm shells, sunflower stalk, cotton stalks and so on! Of course, sawdust and any kind of wood chips can also be used! (to use these materials, they need to be carbonized with a carbonization stove firstly! )
Working Principle:
Use the principle of spiral extrusion, compressed the prepared pulverized coal into a certain intensity of cylinder or plum-flower shaped through extruding.
Coal briquette extruder is the main equipment in the system of molding fuel,it squeeze powdered coal into a certain hardness coal briquette sticks (various shapes according to customer's requirements),in place of block coal,it can make full use of coal dust to reduce fuel cost
Packing & Delivery