China Scrapers Abrasion Resistant Steel Wear Plate

China high quality wear resistant plate

Welldam wear plate are manufactured by welding one or multiple abrasion resistant layers on a medium or low carbon steel base plate. The overlay alloy has a high amount of chromium carbide hard particles.

Product Name wear resistant plate BrandWelldambase PlateQ235/Q345Hardfacing layerHigh chromium high carbide overlayChemical CompositionC(%): 3.0-5.0 ,Cr(%): 25-40MicrostructureThe carbide (Cr7C3) volume fraction on the microstructure is above 50%HardnessHRC58-65Surface TreatmentHardfacing,clading,coatedTechniqueHardfacing,open arc welding,submerged arc weldingWear ResistanceHigh wear resistance,30 times higher than low carbon steel and 12 times than heat treated steelImpact ResistanceMediumFlatness tolerance±3mm/mThickness toleranceUniform overlay thickness, with tolerance within 0-0.5mmMain Thicknesses3+3,4+4, 5+5
6+4,6+5,6+6,6+8
8+4,8+5,8+6,8+7,8+8
10+4,10+5,10+6,10+7,10+8,10+9,10+10,10+20
12+4,12+5,12+6,12+7,12+8,12+10,12+11,12+12
14+6,14+8,14+10,16+6,16+8,16+10
18+6,18+8,18+10,20+5,20+6,20+8,20+10,20+20,30+10,40+10
CustomizedPlate SizeOpen arc welding wear plate:1400*3400mm
Submerged arc welding wear plate:1400*3000mm,
1400*3500mm, 2100*3500mm
CustomizedPlace of OriginChinaApplicationMining,Steel,Cement,Power,Port,etc

What types of companies usually order wear plates?

Any company that has equipment with components that slide against each other or that are exposed to abrasive or corrosive materials or impact damage such as steel mills, pipe mills, aluminum mills, chemical companies, mining, military, etc.

Are there different types of wear plates?

Yes, wear plates and liners can be made from many different materials: C954 Aluminum Bronze, 4140QT, 4340QT, AR400, and AR500 are very common.

How are wear plates used?

Wear plates or liners are used to prevent damage to the main machinery due to abrasion or impact and to increase the life of the machine.

Examples of machines or components that might require wear plates or liners are:

CrushersShreddersCasting EquipmentSteel and Aluminum Mill EquipmentHeavy Earth Moving and Lining Equipment

Other applications for Abrasion Resistant Steel include:

Wear BladesChoppersScrapersMining ToolsChippersPunch Press ApplicationsPunch Press ApplicationsWear RingsWear SegmentsBucket ScrapersWhat types of material are wear plates made of?

Wear plates can be made of mild steel, abrasion resistant grades ranging from A514 to AR400 or AR500, flame hardened grades such as 1045 or 4140 or through hardened materials such as 1045,4140, A2, D2, S7 and others.

Abrasion resistant wear plates are designed to unbolt from your equipment, allowing you to re-grind and re-shim to the original height of your equipment or replace with another liner.

What else should I know before I order my wear plate?

You should know the what hardness of the plate is and what the intent is of the liner. The harder the plate that is used, the longer it will last in service, but there are trade-offs. For some parts, you will need a softer material that is intended to wear out before your primary surface.

Ordering a wear plate from PGI

In some cases, we can modify your equipment to incorporate these liner plates when not in the original equipment design. If your equipment has lost some efficiency or does not hold the same tolerances as new, inspect the worn parts. There could be an easy and cost effective fix to the problem.

FAQ
1.Can we supply the sample ?
Yes,we can supply the sample.You can tell us the detail size.
2.Can we accept customize?
Yes,we can.We can manufacture as customer's requirement.You can send the CAD or drawing to us.
3.Quality problem?
According to the standard for production.And the products must pass the quality inspection department.We also accept Third Part Inspection.
4.Delivery time?
prompt delivery for standard size,or under the contract.
5.Payment term?
Under the contract.
6.Other problem?
You can contact our customer service staff to ask help.