China Sdlg 15t-E7150f Comfortable Convenient Wheel Excavator with Hydraulic System

Product Description

Sdlg 15t-E7150F Comfortable and convenient Wheel Excavator with hydraulic system
E7150F is an energy-saving, reliable and comfortable product developed by SDLG absorbing VOLVO advanced technology. This product has outstanding mobility, is equipped with enhanced working devices, and optimized matching power hydraulic system, suitable for a variety of harsh working conditions .
· Reliable and stable
The working device uses high tensile strength steel plate, the shaft seat uses forging parts, and the middle part is welded with large cross-section partitions. Robot welding, welding seam flaw detector detection, reliable and durable; standard 0.6 cubic meter standard bucket, the easy-wear parts of the bucket are all welded with super wear-resistant material to strengthen the plate, the average service life is more than 20% longer than the traditional model; adopts reinforcement Type wet drive axle with reasonable load distribution, uniform force, stable performance and longer service life; equipped with ZF fixed-axis electro-hydraulic shift gearbox, reliable performance, simple and flexible operation; adopts reinforced rack, reliable and stable; high rigidity The three-box structure is off the shelf, with small deformation, high strength and long service life; data bus communication technology (CAN communication) is adopted between the control units such as E-ECU, and the reliability is high; the hydraulic components of international famous brands are used, and the noise Small, low failure rate, stable work, good durability;
· Energy saving and high efficiency
The original imported Deutz low-speed, high-power electronically controlled three-stage engine, with large output torque and good power; using electronically controlled high-pressure common rail technology, high injection pressure, fuel injection timing is controlled by E-ECU under full working conditions, and full combustion , The production efficiency is high; the hydraulic system has the functions of double pump confluence, flow regeneration (boom, stick, bucket), rotation priority, boom priority, etc., each action cycle is shorter, and the work efficiency is higher; the electrical system is equipped EECU, VECU and IECU electronic control systems enable the whole machine to have a variety of working modes to adapt to different working conditions, saving energy and high efficiency;
· Comfortable and convenient
Equipped with a color LCD monitor, with self-checking, monitoring, emergency fault alarm, GPS positioning and remote monitoring functions, good human-computer interaction, convenient operation and maintenance; spacious and bright cab, wide field of view, good sealing effect, equipped with eight directions Adjustable seat, dual-stage filter heating and cooling air conditioner, silicone oil rubber three-stage shock absorber, good damping effect, comfortable driving environment; the rear of the boom is filled with lubrication difficult positions, and the grease pipe is used to draw out and concentrate, which is convenient for maintenance; Automatic air-conditioning, dual-stage air filtration, multiple air outlets, three-dimensional all-round cooling and heating design, improve the driving environment; pilot handles and control switches are arranged on both sides of the seat, which are within reach and easy to operate; equipped with an open hood, Convenient maintenance; streamlined appearance design, simple and smooth lines, beautiful.

Product Parameters

Overall dimension Overall width of upper assembly2490mm Overall width2496mm Overall height3543mm Tail swing radius2290mm Ground clearance of counterweight1208mmWheelbase2800mm Crawler gauge1914mm Min. ground clearance350mm Overall length7340mm Overall height of boom3543mmOverall parameters Bucket capacity 0.6m³ Overall operating weight 13100kg Max. excavation force 97.7KN Slew speed 12.2r/min Traveling speed (low/high) 3.6/37.5km/h Max. digging radius 7770mm Max. digging depth 4700mmMax. digging height 8395mm Max. dumping height 5943mm Min. front slewing radius 2613mm Engine ModelSD60BType Four-stroke,inter-cooled, superchargedRated Power@Revolution Speed 110kWDisplacement 5700mL Cylinder bore x stroke 98*126mm Emission standard GB20891-2014 China Phase III Rated fuel consumption 214g/kw.h Max. torque 690N.m Traveling/swing system Traveling brake type Wet disc brakeSwing mode Hydraulic drive internal tooth
single-row ball-bearing Swing brake type Wet disc brakeHydraulic system Hydraulic control type Pilot proportional control valveHydraulic system type Dual pump constant power negative flow control systemMax. flow 160*2+20Operating pressure 330kgf/cm2Fill capacity Fuel 260L Engine oil 25L Hydraulic oil 265L Antifreeze 28L

Certifications

Packaging & Shipping

Company Profile

Our Advantages

After Sales Service