China Sea-Lion Tunnel Washer System Laundry Equipment for Big Washing Plant

SEA-LION Tunnel Washer System Laundry Equipment for Big Washing Plant
The first tunnel washer that is produced by Chinese factory has got 16 national patents and has been listed in the items of the projects that will be supported by China Ministry of Science and Technology and recommended by the industry as import substitute.
Not only on the mechanical engineering, but also machining technology, the tunnel washer SCW-60 has presented you a fresh washing philosophy, and it is well received by large laundry factories serving for hotels, hospitals and industrial washing places. Multiple functions and flexibility are attractive to the investors nowadays and in the future.
Main parameter:
DescriptionSDX-13SDX-16Capacity/compartment60kg60kgCycle2.5-3 min2-2.5minWater pressure0.2-0.4Mpa0.2-0.4MpaSteam pressure0.4-0.6Mpa0.4-0.6MpaCompressed air pressure0.4-0.8Mpa0.4-0.8MpaPower supply24.2kw26.4kwMotor power 22kw22kwNet weight18000kg20700kgWeight with loading 22500kg26000kgDimension (L/W/H) 12830/2456/3280mm15190/2456/3280mm
Features:
1.Suitable for all kinds of textile washing with different colors.
2.Transference of the linen is smoothly done through the bottom without blockage. 60kg of linen for each compartment.
3.1200KG-1800KG hourly.
4.Perfect combination of down flow and counter flow ensure the best washing result.
5.Steam, water, power, labors and floor taken are substantially saved.
6.The consumption of water and steam is reduced greatly thanks to the water recycling system.
7.Due to the design of counter flowing, the directions of water flow and linen running are opposite so that water can go through the textiles strong and rapidly.
8.The washing detergents for each washing tub can be supplied at a ration / and a quantity.
9.The external central controller standing alone can control the whole procedure efficiently.
10.Alarm and warning information can help the machine guard against damage caused by misuse or wrong data input.DescriptionSDX60-13SDX60-16Capacity/compartment60kg60kgCycle2.5-3 min2-2.5minWater pressure0.2-0.4Mpa0.2-0.4MpaSteam pressure0.4-0.6Mpa0.4-0.6MpaCompressed air pressure0.4-0.8Mpa0.4-0.8MpaPower supply24.2kw26.4kwMotor power22kw22kwNet weight18000kg20700kgWeight with loading22500kg26000kgDimension (L/W/H)12830/2456/3280mm15190/2456/3280mm
Water extraction is available with a robust extraction press. Equipped with top brand hydraulic drive, the press can give a stepless pressing pressure up to 45 bar. The strengthened pressing head and imported top grade membrane can assure extracting reliability and long service life. Linen cake after pressing can be discharged at side or in axial direction upon customer's requirement, and the discharge is controlled with fuzzy logic and equipped with IR sensor for safety purpose.
After water extraction, a shuttle system will transport the goods to the pass through tumble dryers automatically. The shuttle can transfer single or double linen cakes to dryers optionally one time. With application of industrial Ethernet, the shuttle can judge operating state of dryers and transfer goods point to point correctly and reliably. Special PVC belt is adopted to eliminate any off-tracking or distortion problem.

The pass though tumble dryers are fully integrated with the tunnel washer system. It can has gas heating and steam heating. Its drying efficiency is optimized by constant monitoring of the airflow back pressure, so that lint can be timely removed, as well as dual temperature readings of the air inlet and output to prevent over-drying. The dryer jacket is fully insulated for maximum heat retention. Fully automated with loading and unloading doors to seamlessly integrate with the shuttles and conveyors via the SCADA control network.
Certificates