China Self-Priming Pump Brass Reversible D. 20 mm Wine Water Oil Transfer Pump

This is a classic self priming lateral liquid ring pump with starry impeller. This particular type of hidraulics provides the pump with an extraordinary self priming capacity, also in absence of a continuous flowing of the liquids in suction ( presence of air or other gases ). It is particulary made for the transfer of liquids such as WINE, MUST, SALTY AND SOFT WATER, MILK, OIL, GASOIL, whose viscosity is not over 30 degrees CENTISTOKES or over 4 degrees ENGLER. The fluids to be conveied are to be neutral and clean or contain in suspansion only a small percentage of solids ( 0.2-0.5% max). They are to have a hardnes and granulation which prevent the damage of the inside pump surface. Yet a narrow mesh filter can be mounted on the suction piping.
Features:
-Height of 6 meters priming
-Possibility of flow reversal
-Single-Phase asynchronous motor, protection IP 44, with swinging inverter and cable
-Continuous operation
-The pumps are supplied with a straight hose-connection and a bent hose fitting.
Fluid Specifications:
-Max termperature 90degree centigrade
-Max Density 1.1 g/cm3
-Free form hard particles(e.g. sand)
-Not too viscous
-Examples:fresh water, sea water, diesel,oil, pesticides, etc.
-Never use petrol, solvents and in General, in environments with risk explosion and fire

HP0.5Turns R.P.M.2800Mouths3/4" MFitting Diameter20mmPriming6mHeight Max27mHeight Max
Reach(H-LT/MIN)1 m-32(lt/min)5m-27(l/min)10m-21(lt/min)15m-15(l/min)20m-9(l/min)