Raw rubber separating machine/Uncured rubber separating machine/unvulcanized rubber steel wire separator
: The equipment is used for separation raw rubber and steel wire from unvulcanized tire, it I adopt Pneumatic, obtain steel and raw rubber from unvulcanized tire. Basing on the Pneumatic, so need air compressor.
1 separating clean rubber from steel,100% purity
2 save labor.
A. The oil-water separator must be connected before the air pump and
air belt.
B. The pressure of the air pump is 0.7-0.8Mpa.
Connect the air pump with the UNCURED TIRE STEEL WIRE SEPARATOR then go into trial operation. After its working smoothly, put the middle parts of the rubber strips (500-600)*(40-50) under the cutter to separate the rubber like the video attachment.
Note:
1. Waterproof, moisture proof, prevent nuts loosening.
2.Grease will be laid on the motor reducer and turning chain per 30 days.
Technical parameters:
ModelQRT-5RemarkOverall dimension(mm)1000*600*8001.Need two persons to operate it.
Motor1.5kwCylinder2pcsValveFoot-valveCapacity/day300-400kg/dayTurning wayChain turningAir pump0.7-0.8Mpa