China Sensor Water Treatment Electrode

online Conductivity/TDS Controller with Sensor
EC/TDS-600
Description: The intelligent conductivity controller EC-600 are new generation upgraded monitor CM-230, Keyboard range switch over, constant input and high/Low limit relay setup, Automatic digital temperature compensation,High/Low limit relay control (alarm) outputIsolation 4~20mA (or 0-5V DC) output signal,Modbus RTU RS 485 communication output (Optional)ESD and MOV protection functionStrong anti-interface function Widely used for electrodialysis, reverse osmosis, ion exchange water system, hydroponic Fertilizer, cooling water control system and general iIndustrial D Printer ndustrial water online monitoring and controlling.Main Technique Specification:Function ModelEC/TDS-600 online Conductivity/TDS ControllerRangeElectric Motor 0-2000uS, 0-1500ppm,
0-9999uS/cm(0-10mS),0-5000PPM
0-20mS, 0-200mSAccuracy1.5%(FS)Temp. Comp.The 25ºC basis, automatic temperature compensationOperation Temp.0~50ºC, with normal temp. Pt. Black or Stainless-steel sensor60~100ºC, with high temperature Stainless steel sensor sensor(optional)SensorK= 0.1 (0-20uS, 0-10ppm)
K=0.1(0-200uS, 0-100ppm),
K=1.0 or 10.0 (0-2000uS/ ppm,0-9999uS/ppm, 0-10mS, 0-20mS),
K=30.0cm (0-200mS) Display3½ Bit LCD Control output signalTwo groups, ON/OFF High limit and low limit relayCapacity of contact point3A/AC 250V (with resistant loads)Current output signal 0-5V DC / 4-20mA signal output, isolated and migrated Communication outputMoudbus RTU RS485(optional)PowerAC 110/220V±10%, 50/60Hz, DC 24vWorking environmentAmbient Temp. 0~50ºC, Relative Humidity ≤85%Overall dimensions48x96x100mm (H X W X D)Hole dimensions45x92mm (H X W)Installation ModePanel Mounted(Embedded)Cable length: 5m or as per requestEC/TDS-600 Picture:

Matched Conductivity Sensor,
1/2" NPT, 1/4"NPT threaded:

No.1- Pt. Black Plastic Sensor No.2 Tiny Pt. Black Plastic Sensor

No.3 -S.S.316L Sensor No. 4-S.S.316L High temp. Sensor NoAntenna .5- Flanged Sensor