China Sewage Pump Submersible Pump Submersible Sewage Pump

Products Name:WQ non-clogging submersible Sewage Pump,submersible pump,sewage pumpBasic introduction:

WQ type electric submersible sewage pump is a kind of new generator products which adopts international technical and domestic characteristic of water pump.

It is widely used in construction site, basement and factory

It can be customized with 304/316stainless steel type,high temperature resistent typeandcutting impeller type.

Using condition:

1. Transmitter tempetature:≤50ºC

2. R type≤100ºC

3. Transmitter density:<1.2x10³kg/m³
4. PH Value: 4-10

5. Motor Pressure:220V/380V/415V/660V,50HZ/60HZ,3PHASE

Application:

1.Kitchen sewage, life sewage and rain water

2. Industrials, chemicals, medicals, medicine company, food industrials.

3.construction projects

4. The water plant sewage discharge water and conservancy project

5. Urban sewage treatment plant emissions system

6. Farmsseptic tank

Packages Declaration :

1. All of our WQ electric submersible sewage pump are packed by the standards plywood box complied with the exportation requirement;

2. We can also customizing theLifesaving package to pack large industrial centrifugal water pumps according to customer's request;

We have desinged the top-grade quality pump and keep upgrade our product all the time by our professional Engineers Team, we also cooperate with many scientific research institutions and universities to ensure the new products researchment.

Exportation :
We have more than 68 distributors and more than 300 senior sales partners around the world, especiall in USA, Australia, Mexico, Thailand, Newzland, Chile etc.

fault phenomenonfailurecauseeliminationmethods1.No power supply or one or two phase power supply is needed
Check all phases of power supply and restore power supply
2.Poor contact of ac contactor and burning of coil
Repair or replace contactors
cannotstart3.
The power switch is not closed, malfunction or damaged
Close the switch and replace it if the poweBuilding Hardware r indicator does not turn on4.
Thermal relay trip or damage
Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be startedWater level is too low
Put water in the sink
The motor burned
Repair or replace the motor
1.Line is loose
Check wiring and tighten connectors
2.Frequency converter malfunctionCheck the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.The manual is normal3The frequency converter is damagedRepair or replaceAutomatic transmission failure4.Pressure switch damageRepair or replace5The pressure transmitter is damagedRepair or replace6.Switch failureRepair or replacePump non - suction pressure gauge pointer to beat violentlyInsufficient water supply for perfusion, air leakage at the connection between pipeline and instrumentCheck pipeline and bottom valve, refill water diversion. Tighten air leakage
The pump consumes too much power

Too much flow, impeller wear
Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow
about Lyson♦ ESTABLISHSensor ED IN THE SIXTIES♦ ONE OF THE FIRST THROUGH THE ISO9001:2008 DOMESTIC,INTERNATIonAL QUALITY SYSTEM CERTIFICATION♦ SILVER MEDAL WAS AWARDED AT THE NATIonAL ConFERENCE ON THEAPPLICATION OF SPARK CUP TECHNOLOGY♦ WIN THE NATIonAL AWARD FOR EXCELLENCE IN CIVILIZATION COMPETITION♦ GET THE LC OF THE CHINESE GOVERNMENT