China Sf Flotation Machine

Brief Introduction
When the impeller is revolving, the pulp in the impeller cavity can be swing out at the centrifugal force by the impeller blades and be negative pressure zone in the impeller cavity. Meanwhile, the pulp in the top of the cover can be inhaled to the impeller cavity through the circulatory hoses on the cover and then the pulp can be circulating upward. The pulp in the bottom of the impeller can be swing out and supplement to the center so it forms the circulating downward. Air is inhaled from the inhalation pipe and center pipe to impeller cavity and mix with the pulp and then arise a lot of small bubbles. The bubbles go through the cover and evenly disperse in the cells and form the mineral bubbles. Mineral bubbles float to the forth section and be scraped out to be forth product.

Note: Mechanical agitation, self air inhalation and pulp suction, it can be combined with JJF cells to be the suction cell.
Advantages and Characteristics
Two sides backward blades of the impeller make the pulp bicirculating in the cell
Large space between impeller and cover can have large air inhalation
Low rotation speed of impeller extends the service life of the spare parts
Forward tank and blind angel make the forth moving quickly
Large air inhalation and low energy consumption
Long life of the spare parts
Good for the coarse particles flotation.

Model
Effective volume
(m 3 )
Capacity
(m 3 /min)
Diameter of impeller
(mm)
Impeller rotation
(r.p.m)
Power of impeller
(Kw)
Power of Scrapper
(Kw)
Weight of each cell
(Kg)SF-0.370.370.2-0.4300352-4421.50.55470SF-0.70.70.3-1.035033631.1970SF-1.21.20.6-1.24503125.51.11400SF-2.82.81.5-3.5550280111.52120SF-442-4650235151.52600SF-663-6760191302.23000SF-884-8760191301.54292SF-16165-16850169-193451.57415SF-20205-2073018630x21.59823