China Short Cycle Automatic Melamine Press Line

I. Application
The press is widely used for wood procession, machinery, and construction and decoration industry. For example, the series hot press is applied to particle board, plywood and MDF board lamination, adopting melamine paper, décor cloth, PVC film and veneer etc as the lamination material. While in machinery and construction industry, it is used for pressing veneer mould such as door, window etc.
II Product Introduction
Centering on the inquiry of customers, the specific collocation of T type hot presses (lines) are designed. There are Four Models:
A model: adopting manual loading paper and manual unloading final board with low price and small landing area.
B model: adopting manual laying up paper, manual loading board, vacuum suction unloading final board with low price and smaill landing area.
C model: adopting manual loading paper, automatic loading board, vacuum suction unloading final board with low price and small landing area.
D model: Standard type laminating production line is with full equipped and automatic trimming and stacking.
1 A model short-cycle laminating hot press
Application:
This kind of laminating hot press is widely used in processing particle board, MDF board, HDF board and so on in one side or both sides with melamine paper to make furniture board and laminate flooring board. All kinds of boards can be produced, such as 4*8 foot, 4*9foot, 5*8foot, 6*8 foot and so on. Special sizes can also be made according to customers' need.
Specifications:
The YX-1200, YX-1400, YX-1700, YX-2000, YX-2200, YX-2400 and YX-2800 hot press use frame structure, with overhead hydraulic cylinder. The machine is also equipped with in-feed truck controlled by converter and out-feed roller frame. The machine is controlled by PLC and the advantage is easy operation, convenient installation and maintenance, little land occupation, low cost and high yield (1200 pieces/day). If needed, we could provide other accessories such as all kinds of cushion mat and mould plate, thermal oil boiler etc.
Parameter table:

ModelPressureOil cylinder diameterOil cylinder quantityOutputLaminating modeYX-120012000KN320mm61200 pieces/daydouble sidesYX-140014000KN340mm61200 pieces/daydouble sidesYX-160016000KN320mm81200 pieces/daydouble sidesYX-240024000KN420mm81200 pieces/daydouble sides

2. B model short-cycle hot press
Application:
This kind of laminating hot press is widely used in processing particle board, MDF board, HDF board and so on in one side or both sides with melamine paper to make furniture board and laminate flooring board. All kinds of boards can be produced, such as 4*8 foot, 4*9foot, 5*8foot, 6*8 foot and so on. Special sizes can also be made according to customers' need.
Specifications:
The YX-1200, YX-1400, YX-1700, YX-2000, YX-2200, YX-2400 and YX-2800 hot press use frame structure, with overhead hydraulic cylinder. The machine is also equipped with in-feed truck controlled by converter and automatic out-feeding device. The machine is controlled by PLC and the advantage is easy operation, convenient installation and maintenance, little land occupation, low cost and high yield (1200 pieces/day). If needed, we could provide other accessories such as all kinds of cushion mat and mould plate, thermal oil boiler etc.
Parameter table:

ModelPressureOil cylinder diameterOil cylinder quantityOutputLaminating modeYX-120012000KN320mm61200 pieces/daydouble sidesYX-140014000KN340mm61200 pieces/daydouble sidesYX-160016000KN320mm81200 pieces/daydouble sidesYX-240024000KN420mm81200 pieces/daydouble sides

3 C Model short-cycle laminating hot press line
General Description:
The line is one of the world level products that based on advanced technology and independent development. It has the merits of high automation degree and low labor strength.
This line is available for the decorative lamination on MDF board, Particle board, HDF board and plywood etc., especially for the lamination of furniture panels and laminate floorings. The suitable materials are melamine paper, wear resistant paper, and decorative cloth and slice veneer etc.
Standard sizes are: 4'x 8', 4'x 9', 4'x 10', 4'x 16', 5'x 10', 6'x 8', 7'x 9', 6'x 12'etc. Special sizes can also be made according to customers' need.
4 D Model short-cycle laminating hot press line
General Description:
The line is one of the world level products that based on advanced technology and independent development. It has the merits of high automation degree and low labor strength.
This line is available for the decorative lamination on MDF board, Particle board, HDF board and plywood etc., especially for the lamination of furniture panels and laminate floorings. The suitable materials are melamine paper, wear resistant paper, and decorative cloth and slice veneer etc.
Standard sizes are: 4'x 8', 4'x 9', 4'x 10', 4'x 16', 5'x 10', 6'x 8', 7'x 9', 6'x 12'etc. Special sizes can also be made according to customers' need.
III. Our service:
Our products have been exported to worldwide, such as Iran, Saudi , Egypt,Turkey,Malaysia, Brazil, South Africa, India, Dubai,etc. we have good after-sell services, Our product guarantee is one year and our engineer is available to serve overseas.
It is our honor to have the chance to cooperate with you. If you are interested in our products, please contact us without any hesitation. We will offer you our best services, the high-quality commodities and the most favorable price.
Pre-sale service:
1) Free consultation on any aspect of equipment/production line;
2) The professional materials & flow chart;
3) Offering the reasonable plan & proposal as per customer's specific requirements;
4) Related reception for equipment inspection;
In-sale service:
1) Oversea equipment installation & commissioning;
2) Personnel training;
After-sale service:
1) 24 hours online service;
2) Video for equipment maintenance;
3) One year quality warranty;