China Sic Silicon Carbide Pipe Tube Cyclone Cone

SIC Silicon Carbide Pipe Tube Cyclone Cone
Description
Sintered alpha silicon carbide is produced by sintering ultra-pure sub-micron powder. This powder is mixed with non-oxide sintering aids, then formed into complex shapes by a variety of methods and consolidated by sintering at temperature above 3633 degrees Fahrenheit

The sintering process results in a single-phase fine-grained silicon carbide that is very pure and uniform, with virtually no porosity enabling the materials to withstand corrosive environments, abrasive environments, and environments operating under high temperature (2552 degrees Fahrenheit). These properties make sintered alpha silicon carbide ideal for applications such as cyclone liner.
Appearance:
Product character
-- Low density, High strengt
-- Good high temperature strength (Reaction bonded)
-- Oxidation resistance (Reaction bonded)
-- Excellent thermal shock resistance
-- High hardness and wear resistance
-- Excellent chemical resistance
-- Low thermal expansion and high thermal conductivity

Technical data:

Physical charactersUnitPropertiesSIC content%95-88Free Si%5~12Bulk densityg/cm3>3.01Porosity%<0.1HardnessKg/mm22400Coefficient of bending strength at 20 degrees CelsiusMpa260Coefficient of bending strength at 1200 degrees CelsiusMpa280Modulus of elasticity at 20
Degrees CelsiusGpa330Fracture toughnessMpa*m1/23.3Coefficient of thermal conductivity at 1200 degrees Celsius
W/m.k
45Coefficient of thermal expansion at 1200 degrees Celsius
10-6mm/mmK
4.5Coefficient of heat radiation <0.9Max. Working temperatureºC<1380Note: Data of properties quoted are typical results from test pieces and therefore should be used only as a guidance