China Silicon foam sealing gasket machine

2-Component Foam Machine
HT-320
HT-320 2-component foaming machine is a 2-component mixing and dosing system. It can be used to foam,glue and pot for various
workpieces. HT-320 adopts Germany BARMAG high accurancy metering pump which can adapt low viscosity, medium viscosity and
high viscosity polymers and materials, Such as polyurethane, silicone, silicon gel, exposy resin and other reaction materials. HT-320
can run with high stability as an independent equipment or a part of automatic production line.
2-Component Foam Machine

Dosing and Mixing System
HT-320 has different operating modes. The standard control system is a movable cantilevered control panel with 15-inch touch screen.
After adjusting the machine and prestting the parameters, the machine will run accurately, safely and efficiently according to the technical
setting during the production.
Control System Parameters
• Perfect combination of industrial PC and control of motion
• Real-time bus systom
• Pluggable switchpanel( aviation socket)
• 3 operating mode: adjust/ready/automation
• Formulation management
• 3 levels password protection ((optional)
• Data backup by U disk, SI or LAN
• Accurately adjust material reaction time, feeding quantity prest, automatic cleaing and air injecting/ stirring materials by programs
• Adjust automatic material feeding by controling the pressure
• Counter and timer start automatically as the machine runs
• Monitor and digital dispaly the pressure of components
• Open interfaces
• Operating system and programs can be store in a memory card
Driver technical parameters
• Speed-control servo motor with speed and ajusting display
Dosing and Mixing System
Driver power
• Mixing head: servo motor 0.4 KW
• A gear pump: servo motor 0.4 KW
• B gear pump: servo motor 0.4 KW
• X-axis gear: servo motor 1 KW
• Y-axis gear: servo motor 1 KW
• Precise gear pump (optional)
• Output volume:0.05/0.10/0.20/0.3/0.6/1.2/3.0/6.0/12.0/20.0 ccm/R
• Special pump can be customized
Pipes
• The length of pipe is customized according to customer's requirements, equiped with dynamoelectric and pneumatic connectors
• Component A: fabric reinforced PA high-pressure pipes
• Component B: steel-wire reinforced teflon high-pressure pipes/ PTFE explsoin proof pipes
Electric power
• Rated power: approximately 6 KVA
• Average power comsumption: approximatively 4 KVA
Demesions
• Material Tanks A:40L/50L/60L/100 B:40L/50L/60L/100
• Worktable 2000*1000*900mm(L*W*H)



Motion System
3-axis high efficiency linear robot is drived by gear
and rack ;strong structure and high acceleration can
meet the requirements for high accurancy process.
Cantilevered operating interface is easy to control
and program the machine. Technical parameters can
be modifed conviniently on the touch screen.
The base adopts the welded structure. Fixed feet and
adjustable feet are optional.
This machine is drived efficiently and stably by servo
motors with gear and rack.
Parameters
Demensions:4000*3000*2200mm(L*W*H)
Effective stroke:2390*1250*160mm(X*Y*Z)
Weight:1900KG
Power:3*380V
Max X-axis speed:12000mm/min
Max Y-axis speed:11000mm/min
Max Z-axis speed:10000mm/min
Motive transmission:servo motor-gear &rack
Air pressure:6-8bar(dry)
base color:RAL7035
Y-axis color:RAL1026,Yellow-alarm
Raw Material-PU
PU is a product of 2-component Polyurethane. It adopts FIPFG (foamed-in-place foam gasket) technology which can foam on the
workpiece directly. The finished product is a soft and elastic foamed gasket. This gasket is made from component A and component
B. Component A is mainly polybasic alcohol, Component B is a hardener-isocyanate. After mixing A and B according to a certain
proportion and completely foaming, the mixture will become a soft foamed sealing strip.



• Mixing time:time for mixing component A and component B
• Reaction time:time for the mixture to react( about15-60 seconds after mixing)
• Foam time:time from reaction to finish (about 15-180 seconds)
• Dry time:tiem for no viscosity on the suface, and no damage with touch under room temperature 25 ºC(about 2-20 minitues later)
• Available time:time for the availability of gasket to be pressed or assembled (about 20 minitues-12 hours later)
Shanghai Kaiwei Electric Equipment Co.,Ltd.
Michael Meng
Mob: 15000612456
Website :kaiwei-electric.en.made-in-china.com
Add: No.336, Lane 399, Kangyuan Road, Qingpu District, Shanghai, China 201714