China Single Arm Type Welding Fume Extractor for One Welding Station

Single arm type welding fume extractor for one welding station
Smoke layer, dust, welding fumes and a bad atmosphere in your workshop? Or work stations are frequently changing? The below Loobo portable fume extractors help you to solve this. Contact me for more details.



JK Cartridge type fume extractor

ModelAirflow
M³/hPower
KWVoltage
V/HzAsh removal modelcompressed air
(mpa)Dimension
(mm)Noise
(dbA)JK120012000.75380/50automatic blow0.5-0.6530*640*1000<70JK150015001.1380/500.5-0.6530*640*1000

Use for purification of the smoke and dust during the welding, polishing, cutting, grinding process and the recycling of rare metals and precious material, can purify large amounts of suspended small metallic particles in the air.

* Operating Principle:

It is equipped with three layer filter system

1, under the help of the fan device, the welding fume is sucked into inlet through sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, the left fume and dust is sucked into gravity separator, and then the bigger particles firstly descend into dust bag.
2, the smaller particles are arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filters.
3, in clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enters into air or other required room.

***Facility Characteristics

1)It is equipped with ABB turbo fan and motor imported from Germany and America, with overload prevention circle to avoid motor damage. It is of steady performance.

2)It is equipped with built-in centralized PLC controlling system. The operation panel is clear and simple, very easy to operate.

3)Pulsing back-flushing automatic dust-removal system: The filter core is the automatic rotating and back-flushing type, which keeps the filter core surface clean when working, to insure the stable blowing rate; the air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.

4) The filter core is imported from America with long useful life. It can arrest the 0.3μm particles. The filtering effect is good for all kinds of particles including the wet particles.

5) It is equipped with the all-directions sucking arm of 360 degree rotating. It can suck the fume exactly from the source which make best of the fume collection efficiency, and insure the workers' health in the largest extent.

6) It is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life, safer and more reliable.

7) Clean air uniform guidance and dispersed from the grille outlet, to keep the noise minimum.

8) It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.

9) Photoelectric controlled on/off, energy saving and high efficiency. The hood has the lighting device which is upon customer's choice.

10) The parts working condition are all stable and have long useful life, meantime easy to be replaced.

Other main similar products-welding fume extractors:

1. LB-JZ model(One cartridge filters):
LB-JZ Series Welding Fume Extractor Parameters Table:

Model
Airflow
(M3/h)
Voltage
(V)
Power
(kw)
Size
L xWxH (m m)
Noise
(dB)
LB-JZ1200
1200
380
1.1
650x550x1250
≤70
LB-JZ1500
1500
380
1.5
650x550x1250
≤70
LB-JZ2400
2400
380
2.2
650x550x1250
≤72
LB-JZ3600
3600
380
3.0
650x550x1250
≤72
LB-2400S
2400
380
2.2
650x550x1250
≤72
LB-3600S
3600
380
3.0
650x550x1250
≤72
LB-JZ1500(D)
1500
380
1.5
650x670x1250
≤70
LB-JZ2400(D)
2400
380
2.2
650x670x1250
≤72
LB-JZ3600(D)
3600
380
3.0
650x670x1250
≤72
LB-2400S(D)
2400
380
2.2
650x670x1250
≤72
LB-3600S(D)
3600
380
3.0
650x670x1250
≤72

2.LB-BG model(wall mounted type):

3.LB-JZX double cartridge welding fume extractors

ModelAirflow(M3/h)Voltage(V)Power(Kw)SizeLxWxH (mm)Compressedair(mpa)NoiseDb(A)LB-JZX24002400 380V/50/3PH2.2900*800*1400 0.5-0.6≤75LB-JZX360036003.0900*800*1400≤78LB-JZX480048004.0900*800*1400≤78LB-JZX2400S24002.2900*800*1400≤75LB-JZX3600S36003.0900*800*1400≤78LB-JZX4800S4800 4.0900*800*1400≤78

4.LB-JW model(Flat filter):

5.LB-JF model(High vacuum pressure type)

Company Information :
We,Qingdao Loobo Environmental Protection Technology Co.,Ltd is aimed to air purifying and kinds of removing fume exhausted, with its own R&D team more than ten years manufacturer, located in Qingdao city of china, specialized in the main products:
1,portable fume extractor, welding smoke purifiers, soldering fume extraction units, laser cutting smoke filters
2.downdraft benches(grinding dust removal worktable),
3.central fume purification projects,
4.Spare parts:flexible suction arm,etc.
All of our products with the ISO9001, and CE certification for parts of products, the quality can be guaranteed.
ATTN: Miss Molly Huang
Qingdao Loobo Environmental Protection Technology Co.,Ltd
Phone: +86-15064847869
Fax : +86-532-8068 7573
Website:
www.looboqd.com (English version)
www.loobo.cn (Chinese version)