China Single Wing Drop Test Machine

Single Wing Electronic Drop Tester
25 YZ manufacturer
OEM available
High cost-effective
Application:
Drop Test Machine is applied to assess the package in the actual transportation, loading and unloading process by dropping the degree of impact, impact-resistant strength and evaluate the reasonable of packaging design.
Single Wing Electronic Drop Tester Feature:
1. The main axle of tester used dual axle rode, high precision and good stability. Power failure safety design, it will be kept the original condition under power cut and the swing arm will not break away unusually.
2. The tester has set limits upward and down, will not exceed safety range when testing.
3. Support arm with electronic reset capability, can avoid the accident by manual operation.
4. Multi-functional sample supporter: Can rapidly fix the different size package to test the package edges, sides and corners.
5. Micro adjusting control, can rapidly set to the needed testing height.

Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. Single Wing Electronic Drop Tester is our star products, and we had obtained the CE certification for this machine.
After-sale service:
Feedback within 2 hours, and offer solution in 4 hours and help to solve the problems.
Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

If you want to learn more Single Wing Electronic Drop Tester knowledge, welcome to contact us at any time

Technical Parameters:Model AS-DT-150 Max. Weight of Test Samples (Kg)100 Height of Drop (mm)300~1500 Max. Dimension of Test Sample W*H*D (mm)1000*800*1000 Falling Floor Size W*H*D (mm) 1700*50*1200 Drop Method Face, edge, angle Test Bench External Dimension W*H*D (mm) 1700*2700*1200 Weight (Kg) 600 Power AC 380V