Product DescriptionKITSENFastform is anDiamond Tools advanced aluminum panel-prop-formwork system which allows early stripping operation.No Restriction, Can be adjusted by Changing the Prop.Product Parameters
Product NameKitsen Fastform SystemMaPrinting Machinery terialAluminum Alloy 6061-T6, Birch Plywood Basic ComponentsPanel1800x1200mm Filler Beam1800/1200/900/600mm Truss1800x600mmOthersProp, Lock Pin, Guardrail Post,Cantilever Support BraceAdvantagesFast &Efficient-Modular components, beam and panel are made of aluminum which is light enough to erect, strip and disassemble.One worker can assemble 27m2 per hour, and dismantle 54 m2 per hour. (One worker can install 100m2-140m2per day.Allowable concrete thickness ≤300mm.Birch plywood thickness:10mm.
Safe&Reliable-Stable system with 6-direction locking restrictions Simple-only three basic components: panel, crown, propProduct Assembly Description: 1.Check that all components are on site, Power & Generating Sets undamaged and that they are functioning correctly - (refer to Checklist and Quantity Schedules).
2.Damaged or incorrect components shall not be used.
3.Make sure the panel is clean before assembly.
4.Handle panels with careStone Processing Machinery during transit, avoid bumping and collision.
5.Do not hit, pry and drop panels roughly when stripping.
6.Assort and pile up panels properly. Handle panels with care.
7.Keep in mind that the maximum safe working load capacity is 13.75KN/ m2.