Features
-This machine tool is used to process plsnes, model surfaces, key seating, etc and it is suitable for the single-piece or small-batch production workshop.
-The main transmission mechanism is to transmit the throw-over motion of the rock er arm into the to-and-fro motion of the ram the operating platform can move vertically and horizontally and revolve it is able to achieve automatic feed and hand operating feed. Also it can move fast in case of breakdown, the platform will automatically stop feeding and achieve limit safey.
-When the machine tool is startde, stop using electromagnetic chutch so as to achieve concentration operation of the machine tool.
-Indexing mechanism is used for the graduation of the throw-over motion of the operating platform parts are processed according to the desired graduation.
-This machine is carefully designed and it is characteristic of standardization, generalization, serialization, high degree automation. Also it is of reasonable diatrbution, compact surcture, wll-balanced proportion, good outer looks and convenient maintenance.
-The lubrication of the machine tool is brought about by the oil pump, and lubrication oil is transmitted to various points by the oil-transmitting tubes with convenient adjustment.
-The electric equipment of the machine tool is fixed in the bed at the back part of the lower bed it is safe and reliable because there are concentrated push buttons in the upeer bed.
-As for other power source conditions raised by the customer, special orders of goods supply can be effected through negoti-ation.
Model
B5032D
Max. slotting length
320mm
Max. dimensions of workpiece (LxH)
600x 320mm
Max. weight of workpiece
500kgs
Max. cutting force
7500N
No. of ramistrdes per min.
20.32.50 .80rpm
Vertical adjustment of ram
315mm
Inclination of ram
0-8 O
Distance between tool holding surface and column front
600mm
Max. tool shank size (WxH)
25x 40mm
Table diameter
630mm
Distance between table surface and low end of ram
490mm
Max. longitudinal travel of table (power feeds/hand feeds)
480/ 620mm
Max. cross travel of table (power feeds/hand feeds)
480/ 560mm
Max. rotary angle of table
+ 360 O
Range of table longitudinal and cross power feeds
0.08 -1.21mm
Range of table power feeds
0.052-0.783
Power of rapid drive motor
4kw
Rotating speed of main drive motor
960rpm
Power of rapid drive motor
0.75kw
Rotating speed of rapid drive motor
910rpm
Overall dimensions (LxWxH)
2180x1505x 2285mm
Weight (approx)
3000kgs