China Sludge Press Filter Industrial Wastewater Treatment Machine Dewatering Sludge Belt Filter

Belt filter press is a wastewater treatment equipment which can continuously press large amounts of sludge.
By using high strength material, the device is characterized in large treating capacity, high efficiency and long service life.
Applied Industries
1. Paper making, leather industry, livestock products industry, aquatic product industry, chemical industry and food industry.
2. Sludge concentration treatment and dewatering treatment for municipal sewer, water clarification plant .
3. Separating usage of food industry, chemical industry, mineral industry etc.
Working Principle)The slurry passes through the conveyor, transported to the hopper of the RBYL.) Evenly laid it on the filter belt through the auger. ) The sludge layer with the operation of the equipment, so that the thickness of the material is completely uniform.) 4. The sludge are completely clamped by two ring-shaped filter belts , and the driving roller squeeze it hard. So it can press out a large amount of water from the dewatering zone. )According to the characteristics of the slurry, the extrusion force is automatically adjusted to meet the customer's requirements for material moisture.
ModelCapacity(m3/h)Belt width(mm)Power(kw)Flushing water networkGas concentration(m3/min)Main motor Air compressor Water consumption(m3/h)Pressure(Mpa)RBYL5003-45001.533.0≥0.50.2RBYL7004-67002.233.5≥0.50.2RBYL10005-710002.235.0≥0.50.2RBYL15008-1015002.238.0≥0.50.3RBYL200012-1520002.2310.5≥0.50.3RBYL220014-1622002.2315.0≥0.50.3RBYL250015-1825003.0317.0≥0.50.3RBYL300018-2530004.0420.0≥0.50.3Feed concentration: 0.8-8% discharging concentration: 25-45

Equipment Details
The tension of filter belt can be achieved through the air cylinder and keep in a constant. And the tension would not change with the inlet. It's easy to operate and control.
The press is equipped with the air compressor control system which can automatically correct and detect belt's position on press role.
For the belt press with a wider belt, there is an automatic sludge in device which ensures the sludge can enter into the belt evenly, so as to improve the effect and lengthen theservice life.The device is equipped with two belts.
There is a long gravity dehydration area which can improve the dehydration effect and lower the cost by reducing the usage of chemicals.
Advantage
(1) Automatic control and continuous working
(2) Low energy cost and long service life
(3) High dewatering efficiency and high solid containing rate of mud cake
(4) Easy maintenance and management
(5) Low noise and less chemicals
(6) Economical and reliable, wide application.
FAQ
1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing water processing equipment for more than 10 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.1137, Zhucheng city, Shandong Province, China. It is about 2 hours from Qingdao airport. We can pick you up if you need, welcome to visit our factory.
3.Q: Do you have minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
4.Q: Do you have certificates?
A: Yes, we have ISO,SGS certificate.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q: How to buy your idea products?
A: You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).
7. Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q: What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipment from corrosion?
A: We use the world-famous paint, like SigmaCoatings, PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment?
A: Our machining technology includes laser/plasma cutting, automatic welding, CNC cutting and bending.
12. Q: How to install after the equipment arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
We always put the quality as the first consideration! If you need further information , feel free to contact Us! We are more than happy to help you with any inquiry. Call us or send us an email, and we'll be ready to assist you.