China Small Hole EDM Machine

Table Size: 590x410mm
Table Travel: 500x400mm
Drilling depth: 0-300mm
Drill Diameter: 0.2-3.0mm
Drill Speed: 60mm/min
Small Hole Drilling EDM Machine (BMD703-500) characteristics:
* Can drill deep hole with diameters 0.3mm ~ 3mm (the depth-diameter ratio is 300: 1)
* The speed of drilling hole is 30mm~60mm depth per minute (it is different for different material)
* Can drill wire-cut starting hole, filter hole, jet hole, gas hole, group holes and hole of super depth etc.
* Can drill small holes on the various conductive materials, even semiconductor material, especially stainless steel, chilled steel, copper, aluminium and hard alloy etc
* Can drill on oblique and curved surface directly
* Can easily erode the drill and screw tap etc which is broken in the workpiece and not destroy the screw thread of the holes
* The working water can be normal water or saponification fluid and no pollution is brought
* The operation is easy and convenient
* X, Y, Z axes have digital display devices
* Z axis has the function of setting depth
Main performance indexes and technical requirements.
2. Basic configuration:
A. Three axes have digital displays; It is consistent with operation
B. Z axis uses linear guide rail (driven by the step motor with 5 phases 10 beats), it is driven by DC motor
C. The rotary head is of straight gear transmission, its volume is small
D. The super large scales integrate circuits make the impulse power supply reliable
E. The multiple power supply of high and low voltage and high-power VMOS field -effect transistor
F. The double Z is moved by motor
G. The operate-control box is adjustable, it is fully considered to convenience of operator
H. It contains the operation and control mode of BMD703-400
I. The specialty plunger pump, thread gap filter
J. The marble working table
K. The stainless fixtures
L. The accessories and consumable parts
M. The processing polarity can be changed
N. The processing stability is adjustable
ItemUnitBMD703-400Worktable size (LxW)mm486x310Table travel(XxY)mm300x400Z axis travelmm300+320Max. drilling depthmm0~300Max. drilling speedmm/min60Max. working currentA30Electrode diametermm0.2~3.0Load of tableKg300Working solution water/saponificationWorking reservoir capacityL25Power supply 380V/50HzMax Power consumptionKVA3.5Machine dimensions (LxWxH)mm1060x750x1700Package dimensions (LxWxH) 1300x1040x2030Machine weightKg900Controller type Automatic Z axisDigital display X, Y, Z axisFunction of setting depth have