China Solar Power System Solar Power Box

SUN series solar system control box is a set of integrated products, including solar charge controller, inverter, wiring terminals, control switches etc.,
As long as connected to the matched solar panels and batteries, it would constitute a complete solar photovoltaic system that can serve as power supply. The output has two kinds of DC and AC, for DC load and AC load, it is very convenient to be used. Particularly it is suitable for the absence of power or less power regions.
The solar charge controllers in controller box, it can be automatically charge batteries subject to light conditions and status of the battery, fully intelligent, and it has function for over charge and over-discharge protection, thus greatly extend the battery life.
The inverter in the controller box can convert DC voltage of batteries into alternating voltage, to drive AC loads.
The control switches in control box control the output on and off, a total of five switches, of which an AC output control switch and four DC output control switches, plus a touch button, to control the total DC output switches and timing settings and other functions.
Control box also has a range of protection, can effectively prevent the damaged because of abnormal usage.

SUN-600 Specification SUN-600/12-230SUN-600/24-230SUN-600/12-120SUN-600/24-120Output Continuous Max. Power600WOutput Surge Power1200WConverting Max. Efficiency> 88%> 92%> 88%> 92%Normal Input VoltageDC12VDC24VDC12VDC24VInput Voltage RangeDC10~15VDC20~30VDC10~15VDC20~30VOutput VoltageAC230± 5%AC120± 5%Output Frequency50Hz60HzOutput Wave FormModified Sine WaveNo Load Current< 0.12A< 0.10A< 0.12A< 0.10AInput Low-Voltage Alarm Voltage10.5± 0.5V21± 0.5V10.5± 0.5V21± 0.5VInput Under-voltage Cut off Voltage10± 0.5V20± 0.5V10± 0.5V20± 0.5VInput Over-voltage Cut off Voltage15± 0.5V30± 0.5V15± 0.5V30± 0.5V

SUN-C20 SpecificationRated Charging Current20ARated Load Current20ASystem Voltage12V24VOverload ProtectionYesShort CircuitProtectionYesOpen Circuit Losses≤ 6 mACharging Circuit Voltage DropNot more than 0.26VDischarging Circuit Voltage DropNot more than 0.15VWorking TemperatureTechnical grade : -35 º C -+55 º C (suffix I) ; Merchantable-5 º C -+50 º CDC Charge Voltage14.4V28.8VFloat Charging13.7V27.4VTemperature Compensation-5mv/ º C /2VAutomatic Disconnection10.5V21V Output VoltageControl MethodCharge for the PWM pulse width modulation, the control point voltage for different discharge rates of intelligent compensation amendment;