China Solid Wood Furniture Drying Infrared Burner

The GR-1602 infrared burners are designed and produced for industrial process heating, esp. The powder coating industries, Fiber industry, Glass and ceramics industry

TypeDimensionsHeat outputGas consumptionWeightGR-1602554mm x 135mm x 185mm5400 kcal/hr0.46kg/hr8kg

Work characteristics:
Safety: 2.8 kPa low pressure natural ejector way premixed, more secure and reliable.
Efficient: Strong imported ceramic plates heat storage capacity, wide adjustment range, good radiation effects; its surface temperature may be in the range of 475 to 950 degrees Celsius adjusted to better carry out the coating operations.
Saving: 1.63KW monolithic ceramic plate heating power, 0.12kg / hr monolithic ceramic plate ultra liquefied gas consumption.
Environmental protection: the entire system COX, NOx emissions below international standards related industries (in the standard system configuration and use of environment). Pide range of applications: the option of using natural gas, liquefied petroleum gas, artificial gas and other gas.
Precise control: by the drive, the actuator and valve, the furnace temperature throughout the system, PLC or OPTO22 central control module for precise control of the combustion.
Parameter:
Burner size: 560mm x 135mm x 185mm
Burner Weight: 8 kg / Taiwan
LPG gas consumption: 0.46 kg / hour
Single power: 6.5 kW / h
Heat intensity (power density): 135 kilowatts / square meter
Applicable gas pressure: 2.8 kPa (premixed natural state), or 1.0 to 1.5 kPa (artificial premixed state)
Inlet pressure during artificial premix: 2.5 to 3.0 kPa
Pipe diameter: depending on the specific circumstances
Gas adjustment: flow regulator (actuator plus valve or loop tube) or pressure regulator (regulator)
Ignition: electronic pulse ignition, or ceramic heater ignited
Control: temperature control table thermocouple + + simple electronic push-button control; or PLC control