China Soundproof Fire Insulate Heat Insulation EPS Sandwich Panel House Sandwich Panel House for Lig

Soundproof/Fire Insulate/Heat Insulation EPS Sandwich Panel House/Sandwich Panel House for Light Steel House/Home

Product Information of EPS Sandwich Panel
Sandwich wall panel is a new type of energy-saving wall material. It is a wall material with the same appearance as a hollow floor slab, but it has male and female grooving grooves on both sides. When installing, you only need to stand up the board. Apply a small amount of cement mortar and then install.Sandwich wall panel has the advantages of light weight, high strength, multiple environmental protection, thermal insulation, sound insulation, fire prevention, rapid construction, reduced wall costs, etc .; its weight is only 1/8 of a solid brick wall. The thermal conductivity is only 1/3 of the solid brick wall, the acoustic wave conductivity is only 1/4 of the solid brick wall, saving wall cost by 15-20%, and the construction efficiency is improved by 3-5 times. In addition, it has outstanding environmental protection significance.

Weight: 1/8 of solid brick wall
Intensity : C30
Heat conductivity : 1/3 of solid brick wall
Sound wave conductivity :1/4 of solid brick wall
Reduce wall cost 15% ~ 20%
Adjust the indoor humidity automatically, save space, reduce pollution
Improve construction efficiency 3 times or 5 times
Simple operation and convenient installation
Features of EPS Sandwich Panel
The main characteristics of lightweight EPS cement sandwich wall panel are as follows:

1, Good thermal insulation performance. The thermal insulation performance exceeds the thickness of 570mm brick wall, and the lightweight foam concrete thermal insulation wall board does not need to be used as the outer wall foam insulation layer.

2, The construction speed is fast. The installation is simple and convenient, the roof panel, the grid plate, the floor panel adopts the hoisting welding method, which is more than 8 times faster than the concrete cast-in-place method; the wall panel adopts the assembly welding method, which is more than 5 times faster than the block wall Can greatly shorten the construction period. The wall panel can be sawed, nailed, drilled, arbitrarily cut, and freely manufactured.
3, Soundproofing, waterproof and fireproof performance: the sound insulation effect is up to 42dB, the board has self-waterproof function, and the fire resistance limit is more than 3 hours. Anti-freeze-thaw cycles more than 25 times, moisture-proof performance and other testing items have reached national standards.
4. Earthquake resistance and lightening of foundation load: Compared with clay solid bricks, light wall panels are lighter than three to four times, and lighter than hollow concrete blocks by two to three times, solving girders, large columns and deep foundations. The problem applies not only to low-rise buildings, but also to high-rise buildings, light geology and beaches, beaches and other buildings. The frame connection has good seismic performance, the wall is light in quality, and the wall collapses during the earthquake, which is not easy to cause casualties.
5, The surface decoration is easy. The surface of the EPS cement sandwich wall panel is flat, and the wallpaper, wall tiles and spray can be directly attached after the seam is added.
6. Low overall cost: Due to the foundation load of the light beam column, the construction is fast and the cycle is short, which is 20% lower than the total equivalent of the clay brick and hollow block brick.
7. Environmental protection, energy saving and reduce waste. EPS cement sandwich wall panel materials do not contain toxic or harmful substances, and are energy-saving and environmentally friendly.
8, Increase the use of building area. The wall of EPS cement sandwich wall panel can increase the use of 8-10% of the area, is the property development and buyers are willing to accept.

Specification of EPS Sandwich Panel

LengthWidthThickness2270mm
2440mm 610mm60mm75mm90mm100mm120mm150mm

1. Grass-roots cleaning
Clean up the grassroots that needs to be constructed, and the mortar or concrete protruding from the wall must be cleaned with tools to facilitate the construction of the next sandwich wall panel.
2. Elastic line bin
Perform the elastic line operation on the ground and the appropriate position of the wall surface to ensure that the installed sandwich wall panel can be horizontal and vertical. Position and grade the edges of the partition wall and the edges of the doors and windows, and then select the plates with the same specifications according to the dividing lines.
3.Sizing preparation
Cut the sandwich wall panel as needed, pay attention to adjust the width and length of the sandwich wall panel to minimize unnecessary losses. Then mix cement and medium sand in a ratio of 1: 2, and then add building glue to prepare a paste. When sizing, first use the water to paint the uneven grooves of the partition board, and then apply the polymer mortar to the uneven grooves of the partition board and the baseline of the floor.
4.Install wall panels
Move the sandwich wall panel to the position where it needs to be installed, stand it up, and align it up and down with the baseline. Use a shovel to pry the partition board from the bottom of it, and then press the board firmly against the board. , Make the mortar overflow from the joint, and then temporarily fix it with a wooden wedge, check the flatness and verticality of the partition wall board. After the inspection is completed, the connecting part between the wall panel and the wall panel needs to be fixed with a special steel bar at an angle of 45 downwards.
5. Grouting construction
After the sandwich wall panel is installed and calibrated, it is filled with cement mortar with a mix ratio of 1: 2 and the building glue is blended. The upper and lower gaps of the wall board and the joints between the boards must be used as much as possible mortar to fill. In the process of grouting, if you want to bury a concealed pipeline or a switch box in the wall, you can use mortar to fill it after the installation is complete.
6.Finishing
If you want to install a door frame on a lightweight partition wall, you can use a splint to cover the door directly on the wall panel, fix it with iron nails, and then use a decorative panel for the cover. Finally, the surface of the partition wall is coated with paint. You can also choose to paste your favorite porcelain to achieve certain aesthetic requirements.

FAQ

1. Q:How about your packing?

A:Free packing: we use normal pallet and packing belt for panels.

2. Q:How about your loading?

A:Our loading is normally 18 pallets per 20' container or according to clients' requirements.

3. Q:What is your MOQ?

A:A 20 feet container.

4. Q:How about your time of delivery?

A:It's about 15 days after receiving deposit.

5. Q:How can we get samples?

A:Our samples are free for your reference,you just need to pay for the freight.

6. Q:How about the payment terms?

A:30% T/T in advance T/T balance in US$ before delivery.
Contact Info
XIAMEN ZHonGJIGNTAI BUILDING MATERIALS CO.,LTD
Adress:Unit 2A, Lianchang Building, NO.6-8 Huli Avenue, Huli District, Xiamen, China
Website: http:// www.zhongjingtai.com
Contact Person: Freda Lin