China Split Tombstone Gravestone Photo CO2 Laser Engraving Machine 1300900mm

Split Tombstone Gravestone Photo Co2 Laser Engraving Machine 1300*900mm

Features

Separated Structure

Upper and lower separation design. The Upper parts can be taken down and set up onto the stone as solution for heavy stones while materials loading difficulties and platform load bearing is limited.

Manual Lifting Handle

Distance between the two parts can be adjusted which is Much more convenient for thicker materials processing.

Laser Head

Newly design, More in according with mechanical engineering. Safe and Durable. Simple Operation with high engraving/cutting speed and high laser power convert ratio.

Laser Tube

Adopted high quality EFR F2 80W Co2 laser tube, long working time time and stable

Working Table

Honey Comb Table: applicable to various soft materials with good adsorption effect and low reflection ratio.

Beam Path System

Adopting imported focus lens with high luminousness and mirror with high relativity ensure stable power transference.

Motion System

imported High precision, low friction force and stand wear and CSK Taiwan linear square guide rails and blocks with 3M belt ensured stable transmission, lower noise

Operation System

Advanced USB port RuiDa RDC 6445G DSP control system with large inner memory device and Fast curve cutting and Optimized shortest path function, Greatly improved the working efficiency .

With full-process automatic laser power attenuation compensation , ensuring the performance consistency of engraving/cutting. The High speed motion control program with pre-buffering function enhances productivity more.

Completely compatible with various CAD&CAM softwares such as AuotCAD, CorelDAW, supporting the designs directly exporting. With advanced Color management and defining the working turns with different colors , All or a part work can done in one time.

Rationalized placement of the electronic parts. Optimized heat dissipation effect.

Cooling System

Industrial chiller CW-3000, ensuring the laser tube long time continus working.

Technical Parameters

Effective working area1300*900mmLaser TypeCo2 sealed-off laser tubeLaser tube power80W ( EFR F2) Working tableHoney combDriver mode3 phases stepper motor and Driver, Yako brandGuide railLinear square guide rail ( CSK,Taiwan)TransmissionBelt transmissionControl panelEnglishLaser output control1-100% software settingEngraving speed0-60000mm/minCutting speed0-10000mm/minControl systemRuiDa RDC 6445GControl softwareRDWorks V8Design software when deliveryCorelDrawControl panelDSP offlineResolution accuracy< 0.01mmLocation precision< 0.01mmHighest scanning accuracy2500DPIType of coolingIndustrial chiller CW-3000 coolingWater protection systemYesBlow-off systemAir pump and air blowerWorking temperature0-45 °COperating humidity5-95% (without condensed water)Supporting picture formatPLT,DST,DXF,BMP, DWG,AI,LAS,etcVoltageAC220/110V +10% 50/60Hz, single phaseCertificateCE/FDA

Packing: one plywood case

Reference Working Videos

https://www.topchinasupplier.com