China Spot High Speed Disposable Mask Machine

Introduction:
1. This specification is applicable to the disposable one-to-two mask machine sold by NanCheng machinery Co., Ltd.
2. This machine is a fully automatic line, with a 24-hour full load capacity that can theoretically reach 120,000 to 140,000 units / day (the delay time for refueling may be slightly less than the theoretical value)
3. The outer ear mask machine can only produce disposable flat masks. Whether the masks produced by this machine are medically independent of the machine. As long as the masks are disinfected, the masks produced by this machine can be used as surgical masks.
4. Common medical masks: mainly composed of three layers of non-woven fabrics. The inner layer is a common non-woven fabric; the outer layer is a non-woven fabric with a waterproof treatment, which is mainly used to isolate the liquid sprayed by the patient; the middle filter layer is an polypropylene meltblown non-woven fabric treated with electret; After the final production, it is sterilized and analyzed by ethylene oxide, packed, and shipped away.
Technical Parameters
Machine connection:
1. The machine's connection part has one machine and two machines. Size: 6500 (L) x 3500 (W) x 1950 (H) mm.
Voltage: 220VAC ± 5% 50HZ Rated power: ≤10KW (including welding machine)
2. Output: 100PCS / min.
3. High stability, low failure rate, beautiful and solid without rust.
4.PLC programming control, servo drive, high degree of automation.
5. Photoelectric (optical fiber) detection of raw materials to avoid errors and reduce waste.
This machine is a fully automatic production of folding mask body machine, the main process:
5.1 Includes automatic delivery of raw materials.
5.2 Automatic conveying.
5.3 Cut off the bridge of the nose.
5.4 Mask edge welding.
5.5 Folding.
5.6 Ultrasonic fusion.
5.7 Full process automation such as molding and cutting.
Host part:
1. Mechanical specifications
Production qualification rate: 96%
2. Mechanical characteristics
2.1 Automatic tension control of raw materials to ensure balanced raw material tension.
2.2 Computer program control, high output, good stability and low failure rate.
2.3 Photoelectric detection of raw materials to avoid errors and reduce waste.
2.4 One to four layers of mask body can be produced.
2.5 The machine has the function of total count and batch count. The number of batch count can be set arbitrarily.
2.6 Changing the mold can produce masks of different sizes and styles.
2.7 The whole machine adopts aluminum alloy structure, which is beautiful and solid without rust.
2.8 Mechanically adjustable part: the folded part can be adjusted;
3.Mechanical masks with 1-4 layers of fabric (active carbon material can be added in the middle); welding strength can be adjusted.
Operational requirements:
The automated production line requires 3 people, and if the conveyor belt is canceled, 2 people will need to be added.