China St BrIndustrial High Speed Door

ST Brand High quality Industrial High Speed Door

Control systems
Japanese Mitsubishi Inverter, PLC and other components.

High speed industrial door construction
framework-------In 2mm thicknesses cold-roll steel sheets, or according to your order
Cross bar-------In aluminum lath
Curtain------made in high-density polyester fabric.(Thickness: 0.8mm or 1.5mm)
Transparent window-----transparent pvc film imported from Japan, thickness:1.5mm
Colour: Red, yellow, orange, blue, Grey etc.

Command systems
magnetic loop control, radar sensor, pulling rope, remote control, magnetic loop, push bottom

Safe systems
Photoelectric sensor-------installed on the side tracks, with emergency stopping reaction when sensing obstacles
Safe edge bottom-------when the people or vehicle touch the bottom edge of falling door,it bound up automatically
Emergency stop protection------with emergency stop buttom on control panel

Seal
seal brush are Installed inside the guides, besides,there is trap heavier fabric on the bottom, close to any uneven ground

Technical parameter
Power supply: single phase:220V /three phase:380 50Hz
Power consumption: max 250W
Opening & closing speed: 0.7-1.7m/s (optionally different opening speed upon request)
Opening & closing frequency:1000-1500cycles/day
Wind load:20m/s
Ambient temperature:-30°C to +50°C

framework In 2mm thickness cold-roll steel sheets. Or on request, In stainless steel Rolling shaft In 2mm thicknesses cold-roll steel tube with machined blocks at each and incorporating high-speed bearing Cross bar In aluminum lath Curtain made in high-density polyester fabric (Thickness:0.8mm or 1.5mm) Fire rating DIN75200 Color red, yellow, orange, blue, grey etc. transparent window transparent window