China Stainless Steel Pipeline Water Filter Housing for Water Purification

High Capacity Sanitary Stainless Pipeline Filter

Introduction
The tubular filter is mainly composed of a main pipe, a branch pipe, a filter cylinder, a flange, a flange cover and a fastener. When the fluid enters the filter cartridge through the main pipe,
The solid foreign particles are blocked in the filter cartridge, and the clean fluid is discharged from the filter outlet through the filter cartridge.
Feature:
It is a improved small tube strainer which can remove a small amount of solid particles in the liquid, also can protect compressor, pump, instruments and other equipment to work normally.
Using multichannel polishing processing to ensure the interface Ra reach to 0.6μm close to sanitary level. All of the surface is mirror polished.
1. Compact structure and small footprint.
2, large filtration capacity, to ensure that the effluent water quality meets the requirements for use
3. The pressure loss is small and the service life is longer.
4. Wide application range.
5, easy to use, easy to maintain. The user can install the cleaning.
6, the price is low, reducing production costs.
Tubular filter:
When cleaning is required, screw the screw plug at the bottom of the tube, drain the fluid, remove the flange cover, and remove the filter cartridge.
Reload after cleaning. Therefore, it is widely used in the filtration of petroleum, chemical, sewage and so on.
Selection principle:
1. import and export routes:
In principle, the inlet and outlet diameter of the filter should not be less than the inlet diameter of the matched pump, which is generally consistent with the diameter of the inlet pipe.
2. Nominal pressure:
The pressure rating of the filter is determined by the highest pressure that may occur in the filter line.
3, the choice of the number of holes:
The main consideration is the particle size of the impurities to be intercepted, depending on the process requirements of the media process. The size of the screen that can be intercepted by various specifications of the screen can be found in the table below.
Surface
Treatment TypeMechanical polishing, electrolytic polishing, sand blasting, pickingPolishing precisionMirror Polish Ra≤0.4μm
Operating Conditions
Max Operating pressure0.6MPa, 1.0MPaMax Operating Temp140ºC
Connection
Shell connectionFlange (Eyebolt)In-outlet N1, N2Flange, thread, Tri-clampVent valve N3(optional)3/4'' male threadDrain valve N4(optional)1'' male thread
Dimension Parameters1 basketIn-outlet 2''In=outlet 3''A: Total height
(excluding filter cover)500580B: The distance from inlet to center230C: DiameterФ6''D: The height from in-outlet N1, N2 to ground300360E: Drain port N4 height from the ground60Application:
• Food & Pharmaceutical's production area: beverage, beer, drugs, dairy and etc.
• Corrosive in the chemical production process, such as: caustic soda, soda ash, carbonate, etc.
• Weak corrosively medium for petrochemical production, such as: water, ammonia, oil, hydrocarbon products and etc.
• Subzero treatment in the process of refrigeration: liquid ammonia, liquid oxygen and all kinds of refrigerant.
about US
The Payment Term:
TT 40% down payment and 70% balance agaisnt copy of B/L,L/C also can be accepted.
Delivery Date:
5-10 days according to different product.
The Transport Pattern:
Sea shipping or air transport.
Package way:
Wooden case
The Logo Issue:
If quantity is large,it absolutely no problem to do OEM.
Company Show