China Stainless Steel WCB Pneumatic Soft Seal Gate Valve

Pneumatic Soft Seal Gate Valve

Summary:
Pneumatic soft seal gate valve adopts first-class rubber vulcanization technology to enter rubber into the whole& outsourcing rubber, so that the vulcanized valve can ensure accurate geometric size. The interface of rubber and gate valve is strong, which cannot easy to fall off and it has strong elasticity. Compared with traditional gate valves, Z645X resilient seat gate valve, the bottom adopts the same flat bottom design as the water pipe, whihc cannot easy to cause debris deposition, so that the fluid is unobstructed. Traditional gate valve is often in the water after washing pipe that is because of external things, such as stone, wood blocks, cement, paper debris, debris and other silt deposited in the valve bottom groove, which is easy to cause can not close close and form leakage phenomenon. But soft seal gate valve has not the existence of this phenomenon.

Pneumatic Soft Seal Gate ValveValvePneumatic Soft Seal Gate ValveModelZ645XSizeDN50-1200mmConnectionFlange TypeNominal PerssurePN6,PN10,PN16,PN25MPaBody Material Nodular cast iron; Carbon Steel (WCB);Stainless steel(CF8,CF83,CF3,CF3M)Working Temperature-0~+80ºCAccessorySolenoid valve, positioner, limit switch,
manual mechanismApplication rangeIndustrial, metallurgical, flue gas dust removal, environmental protection,etc.FeaturesIt has good sealing, corrosion resistance, and the fluid is unobstructed, which will not cause debris retention.

Pneumatic Soft Seal Gate ValveNominal DiameterDN50-1200mmConnectionFlange TypeBody MaterialNodular cast iron; Carbon Steel (WCB);Stainless steel(CF8,CF83,CF3,CF3M)Disc MaterialCarbon steel (WCB)Stainless steel(CF8,CF83,CF3,CF3M)Working Temperature-0~+80ºCMode of ActionSingle action(spring return),Double Action(normal open&normal close)Control TypeAdjust type; On-off Type

Main Parts of MaterialBodyGray cast iron; ductile iron; Cast steelDiscDuctile iron; NBRSealing RingNBRBonnetGray cast iron; Ductile iron; Cast steelStemStainless SteelO-ringNBRGasketStainless SteelGlandDuctile iron; Cast steel

The Appearance and Structure of Gate Valve:

Advantages:
Pneumatic soft seal gate valve has the advantage of corrosion resistance. The valve body is coated with powder foam epoxy resin, which changes the corrosion and rusting of ordinary gate valve body and can be used in sewage system.
Pneumatic seat seal valve body bottom (equivalent to pipeline bottom) has no valve plate groove, showing a parallel state, which will not cause debris retention. It solves the problem that traditional gate valve debris is equal to accumulated in the valve bottom groove, which is easy to cause confusion of tears but cannot be closed tightly, so that fluid flow is unblocked.
Features:
1. The valve body is coated with powder epoxy resin, which can prevent the corrosion and rust of the valve body, and can be used in the sewage system, not easy to break. In the past, the traditional iron gate valve was often broken due to the impact, collision or overlap of external objects.

2. The use of three "O" ring seal ring design, which not only can reduce the friction resistance when the switch, and greatly reduce the leakage phenomenon, but also can not stop the water construction to replace the seal ring.

3. Because the valve body internal coating with non-toxic epoxy resin, gate valve inside and outside surface are completely wrapped in rubber and is not embroidered water or corrosion, available for raw drink.

4. The valve body adopts precision casting. The accurate geometric size makes the north of the valve body has not any processing to ensure the sealing of the valve.
5. The body is made of ductile ink casting, and the weight is about 20% to 30% less than the traditional gate valve weight, which is convenient for maintenance.
Company Introduction:
Zhitai Valve Co., Ltd is a member of Valve Association of Longwan District, is located in Longwan Central Industrial Zone, Wenzhou City. It'a professional technology company integrated with development, manufacturing, sales, and after-sales services of valve actuators and and self-controlled valves. Presently, our main products include: pneumatic actuators, pneumatic valves and pneumatic control valves; electric actuators, electeic valves and eletric control valves; automatic control products. Our products are widely applied in natural gas, electricity, petroleum, chemical, metallurgical, construction, pharmacy, paper, printing and dying. Zhitai series actuators and valves are the best choice for automatic fluid control engineering and equipment manufacturing. We sincerely welcome customers from home and abrode to visit us for supervision, communication and cooperation. It's a great honor for us to cooperate with you.