Sunlite Software, DMX Controller, Light Controller Software, USB Controller
Interface USB - DMX IN/OUT avec mode "autonome". Manuel, Logiciel, cable
USB. Fonctionne avec les logiciels Easy Stand Alone et Sunlite Suite en mode
First Class.
DMX IN/OUT "Stand Alone" interface, manual, software, USB cable. Works
with Easy Stand Alone and Sunlite Suite in First Class.
To be fully operational, this package should be used with a PC having the following features:
·Laptop or desktop computer with USB port
·Windows ME,XP or any up-to -date version
·800x600 screen resolution(1280x1024) recommended)
·256Bb Memory (512Mb recommended)
·a 32Mb RAM video card to use the "3D software" software (latest generation for best results)
·Clock frequency:800Mhz (1.5 GHz recommended)
The software is made available in accordance with user's requirements and comes out in several versions with various interface models. In order to meet all possible situations for instant working-order guaranteed, two installations have been made distinct: Step one: installing the DMX512 interface, Step two: installing the software. In both cases installation is carried out via Windows interface and should be easy to complete
DMX512 INTERFACE
The USB-style interface is a small translucent box which is connected to your PC's USB port (see photo below).the software uses the DMX512 protocol to control lighting equipment. This protocol is universal, which is a bonus. Interfaces have a 3-pin XLR-type connector. If your equipment uses a 5-pin XLR connector, it will be necessary to replace the 3 pin connector or purchase an XLR3/XLR5 adaptor. Make sure the connection is properly made (pin 1 to pin 1, pin 2 to pin 2…) when building your own adaptor cable.
REMARKS
The USB/DMX interface is specifically equipped with a memory which allows it to work in Stand Alone mode in case of PC-failure or restricted use. In Stand Alone mode the USB/DMX is equipped with a connector which allows it to be externally-powered (9V or 12V DC). In Stand Alone mode, the interface can recall up to 255 scenes which will be called back in numerical order by pressing the "Previous" or "Next" buttons on the interface box.
To program the Stand Alone mode, Easy Stand Alone software is necessary and should be installed form the CDROM, even though it is easy to use, its own instruction booklet has been enclosed within.
1,Open software use>> Page>>New Page
2 Click >>Create a new page….
3 Click>>Explore…
4 Choose the library file.
5,Click nex(N)….
6.DMX address=1,fixtures=1,and nex(N)
7 Click NEXT (N),Next,Next,and Next
8 you finish