China Surface Treatment Flexible Fiberglass Rod Camping Tent Pole with Thread Joints

Details Images

Outside diameterInside diameterThickness mmΦ6Φ3.21.40Φ6.9Φ3.31.85Φ7.9Φ3.92.00Φ8.5Φ4.02.25Φ9.5Φ4.32.60Φ11Φ4.53.25Φ12.7Φ4.93.90Φ15Φ6.04.50

Connection,End type
Straight metal ferrule, MOQ: 200 metersPlastic cap, MOQ: 200 meters
metal pointed end, MOQ: 5000 PCS (Length per pcs do not matter)
Threaded Joints: MOQ: 5000 PCS (Length per pcs do not matter )
Reflective tape: MOQ: 2000Pcs (Length per pcs do not matter )

Product advantages
The relative density is between 1.5 and 2.0, only 1/4~1/5 of carbon steel, but the tensile strength is close to or even higher than that of carbon steel, and the specific strength can be compared with high-grade alloy steel.
FRP is a good anti-corrosive material with good resistance to atmospheric, water and general concentrations of acids, bases, salts and a variety of oils and solvents.
It has been applied to all aspects of chemical corrosion protection and is replacing carbon steel, stainless steel, wood, non-ferrous metals and so on.
It is an excellent insulating material used to make insulators. Good dielectric properties are still protected at high frequencies. It has good microwave permeability and has been widely used in radomes.
FRP has a low thermal conductivity, which is 1.25~1.67kJ/(m·h·K) at room temperature, and only 1/100~1/1000 of metal. It is an excellent thermal insulation material. In the case of instantaneous ultra-high temperature, it is an ideal thermal protection and ablation resistant material, which can protect the spacecraft from high-speed airflow at 2000 °C.
1 According to the needs, flexible design of various structural products to meet the requirements of use, can make the product has a good integrity.
2 can fully select the material to meet the performance of the product, such as: can be designed to resist corrosion, resistance to transient high temperature, the product has a particularly high strength in a certain direction, good dielectric properties, and so on.
1 The molding process can be flexibly selected according to the shape, technical requirements, use and quantity of the product.
2 The process is simple, can be formed at one time, and the economic effect is outstanding, especially for a product with a complicated shape and a small amount of molding, and the process superiority is further emphasized.
Application


Main product

Pultrusion process

FRP Roofing SheetProtruded Profile High Voltage Products
1. Shape could be customized1. All shape of Profile 1. Under 1800KVA
2. Various kinds of FRP roofing 2. Customized performance: UV /Fire proof etc. 2. Protruded profile or Hand layup shell
3. High Quality and long service life 3. Max size: 800mm*300 (W*H)3. Cross Arm

Molding processMolded Gratings SMC Moulding Box GRP Sectional Water tank 1. Use: Platform, Drainage, Fence1.3000T Hydraulic Press1. Leak-proof, long service life
2. Advantage: Anticorrosive, Anti fire 2. Professional Design Support 2. Large size customization Available
Hand lay-up process
FRP Fish tank FRP flower potMedical equipment shell
1. Customized color 1. OEM and ODM service 1. Customized shell
2. Large size customization Available 2. Large size customization Available 2. OEM and ODM service
3. Small Quantity Order acceptable 3. Small Quantity Order acceptable 3. Small Quantity Order acceptable
Our Company
Shengze is a leading and profession manufacturer of fiberglass products for over 20 years. The main products are various kinds of The annual production capacity is about 8,000 tons.

Certifications
Our Services & Strength
Main Processing Technic Products Advantage
1. Protruded Profile1.High Voltage Protruded profile and Hand Layup Shell
2. SMC Moulding Products2.Customize SMC Moulding Products and Design Support
3. Hand layup Products 3.Customize Large size Hand layup Products
FAQ:
Q: Are you trading company or manufacturer ?
We are factory at specialize at fiberglass over 23 years.

Q:Can you do the production as customized?
Yes, we have a professional technique team,
we could produce the fiberglass depends on your requirements.
Q: What is your minimum order quantity?Our MOQ is 1 PCS.(Without limiting sizes and specification,according to actual situation)
Q: How can I get samples to check your quantity?
We can offer samples for free.Pls feel free to check with me.
Q: How long is your delivery time?
Generally it is 7-10 days,depend on different products. check with me.

Q:How to pay ?

Usually by T/T , L/C , Paypal, Western Union also ok.
Contact Me