Swing arm robot for 30-250T injection molding machine with low price
IV-650V Oblique Arm Manipulator(Robot Arm)
1.This Robot arm is generally applied to 80-200T injection machine
2.Small size,flexible,the robotic arm can rotate randomly to satisfy multiplemanufacture needs.
3.The structure of the robot arm is simple and easy to operate,install and maintain.
4.Self-development control system,can restore 100 sets of procedure
5.Good quality and with low price,the robot arm have high efficiency and stable,taking out time can reach 0.9s.
Structure OF Oblique Arm Manipulator( Robot Arm)
Parameters Of Oblique Arm Manipulator( Robot Arm)
Type IV-650VSuitable Injection Machine 100-250TLifting Distance 650mmTaking Out Time 0.8 sBack and Forth Distance 120mmCycle Time 5 sHorizontal Distance1400mm Working Pressure5kgf/cm²0.4MpaMaximum Taking Weight 8KGMaximum Working Pressure8 kgf/cm²0.78MpaMachine Weight 250KGPowerAC220V±10V50Hz
Accessories Of Swing arm robot for 30-250T injection molding machine with low price
Anti-Falling Cylinder
This arm cylinder is closely sealed and stable,the approching switch is imported.
Photos of High speed oblique arm robot for plastic machine between 80-200T
How to choose Suitable Manipulator(Robot Arm)?
1.How to choose the corresponding manipulator according to the model of injection molding machine?
Choose IV-650 manipulator(robot arm) for injection molding machines with a clamping force below 150 tons.
Choose IV-750 manipulator(robot arm) for injection molding machines with a clamping force between150-250 tons.
2.How to choose single arm or double arm manipulator?
The injection machine with two moulds that only need robotic arm to take materials nozzle please choose single arm manipulator.
The injection machine with three moulds that need two robotic arms to take out products and nozzle at the same time,please choose double arm manipulator.
3.What is the manipulator requirement for the height of plants ?
Single Arm IV-650 manipulator(robot arm),the distance from the mould to the ceiling or the bottom of the crane requires a space of 1.45 meters.
Single Arm IV-750 manipulator(robot arm),the distance from the mould to the ceiling or the bottom of the crane requires a space of 1.55 meters.
Installation of Swing arm robot for 30-250T injection molding machine with low price
INVENT HONOR
Robot Arm Professional Packing
INVENT Service