Specifications
small Thermostat,CE Certification
Large setting range ,Small size
Mechanical bimetal type
High switching performance
Tamperproof Thermostats (Pre-set) FTS 011 Small size
Default temperature settings
Easy to install
High switching toleranceTamperproof (Pre-set) Thermostat FTO 011
Contact breaker /NC (red casing) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising.
Tamperproof (Pre-set) Thermostat FTS 011
Contact maker /NO (blue casing) for regulating filter fans, heat exchangers, cooling devices or for switching signal devices when temperature limit has been exceeded. The contact closes when temperaure is rising.Technical DataSensor elementthermostatic bimetalContact typesnap-action contactService life> 100,000 cyclesMax. switching capacity240V AC, 5 (1.6)A 120 VAC, 10 (2)A DC 30WMax. inrush currentAC 10AConnection2-pole terminal for 2.5mm², torque 0.8Nm max.Mountingclip for 35mm DIN rail, EN 60715Casingplastic according to UL94 V-0, light greyDimensions47 x 33 x 33mmWeightapprox. 30gFitting positionvariableOperating/Storage temperature-40 to +80°C (-40 to +176°F) / -45 to +80°C (-49 to +176°F)Operating / Storage humiditymax. 90 % RH (non-condensing)Prot. typeIP20ApprovalsCE Technical DataArt. No.Contact typeSwitch-off temperatureSwitch-on temperature01160.0-00Contact breaker (NC)+15°C / +59°F (± 5K tolerance)+5°C / +41°F (± 5K tolerance)01160.0-01Contact breaker (NC)+25°C / +77°F (± 5K tolerance)+15°C / +59°F (± 5K tolerance) Switch-on temperatureSwitch-off temperature01161.0-00Contact maker (NO)+50°C / +122°F (± 6K tolerance)+40°C / +104°F (± 7K tolerance)01161.0-01Contact maker (NO)+60°C / +140°F (± 6K tolerance)+50°C / +122°F (± 7K tolerance)01161.0-02Contact maker (NO)+35°C / + 95°F (± 6K tolerance)+25°C / +77°F (± 7K tolerance)