1020L-B2 LED internal low speed set
Model:1020L-B2
Name: LED internal low speed set, Including 1pcs of LED contra-angle, 1pcs of straight-handpiece, 1pcs of air-motor
Features:
1.push button type,Kavo type intra head
2.inner water spray ,perfect cooling systerm
3.LED ,E-generator ,self-illumination, LED bulb can be replaced
4.be compatible with FG bur or CA bur head(Φ1.60mm/Φ2.35mm)
5.match with E-type air motor
6.imported bearing
7.2 holes connector
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.
Operation Instruction:
It shall be sterilized before handpiece is used at the first time;sterilization temperature is 135ºC and last for 12 minutes.
After using,Please follow the instruction to sterilize the handpiece:
1 extract the bur from the handpiece,use the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2 lubricate the handpiece,pour two drops into air tube one time.
3 wrap it with sterilization package and mark.