China Tempered Glass Bend Glass Tempering Furnace Making Machine for Car Windshield

Bending Glass Tempering Furnace
Application: Furniture, shower glass, interior decorations, electrical appliance, architectural curve glass, automotive side window, etc.
Glass tempering furnaces are designed to make finished pieces of glass both stronger and safer in the event that they break. Glass tempering furnaces heat up a piece of glass to a very high temperature, usually over 600° Celsius, and then rapidly cool it uniformly using air jets, a process called quenching. The rapid cooling causing the surface of the glass to undergo extreme compression, making it much stronger against impacts and heat shock. Additionally, due to the intense pressures within the glass, if the glass fails, it shatters into several tiny and relatively spherical pieces, making it much less likely for people to become injured from the shards.
Characteristics
Adopt synchronous processing forming way technology on bend section, which can make sure the accurate and smooth shape of bend temperedglass.quality bend tempered glass.Automatic bend-ing system offering easy operation. Hydraulic pressure driving system ensure glass bending stable and accurate.Precision CNC processed components guarantee the bending accuracy.Multi-group bending mechanisms, each one can camber by itself, and also can be slightly adjusted separately,providing a higher accuracy curvature and meet the requirement of high quality bend tempered glass.
Note: All the size are based on millimeter and production are calculated by 5mm float glass at 80% loading rate and 100% finishing rate. The change of equipment configuration will be in accordance with the difference of glass thickness range and environmental factors, it is depend on actual situation.
Technical parameter

Parameter of hard bending glass tempering furnace
ModelMAXMINThicknessradiusbatch/hKVAHW 1210 + 31250 x 1000350 x3503.2 - 850045≥400HW 2010 + 42000 x 1000350 x3504 - 1550060≥550HW 2415 + 22440 x 1500350 x3504 - 1570030≥500HW 2425 + 22440 x 2500700 x 7006 - 15150026≥700
Note: All the size are based on millimeter and production are calculated by 5mm float glass at 80% loading rate and 100% finishing rate. The change of equipment configuration will be in accordance with the difference of glass thickness range and environmental factors, it is depend on actual situation.
Parameter of soft bending glass tempering furnace
ModelMAXMINThicknessradiusbatch/hKVA
YZW 12201250 x 20001000 x 8005 - 823014≥300YZW 20202000 x 20001000 x 8006 - 823012≥350ZW 24422440 x 42001000 x 10006 - 8120012≥550ZW 24502440 x 50001000 x 10006 - 8120012≥630
Products range is not fully listed here. For further information, please contact with TIMBERY group.
Technology Features
1. Radiant panel installed in heating chamber, which can avoid broken glass drop and damage heating element and ensure the heat inside chamber is absorbed by glass evenly. It is also convenience for the heating parts maintenance.

2. The heating chamber transmission adopts double round belt, orthogonal setting, which can ensure the stable running. High quality of aluminum silicate insulation scientifically sorting and precision cutting technology, it can be improved the heat efficiency and keep the low temperature outside of the furnace.

3.The alloy sections and steel sheet is card slot design & cold riveted double protection design, which can avoid deformation of heat welding and high pressure long time condition. Air platoons can be adjusted in up-down, left-right, front-back these 6 position for multi-angle adjustment , it can make glass cooling effect is the best.

4.Exclusive new radial arch design & adjustable plate inside design can aggregate the high pressure better. So high pressure air can distribute uniformity that ensures glass flatness will be better.

5.Blower will automatically adjust to Zero Frequency in 60s before glass going out. This design will save more electricity consumption than 20Hz frequency.

6.Pass section is design for 4mm glass, use 2 blower for cooling glass. When 4mm glass come out from heating chamber, big blower will open to quenching glass in pass section, after few second, big blower switch off and small blower on, glass transfer to cooling section for cooling. Advantage of pass section is 4mm glass can be full loading area, so production will be 50% higher than only use one bigger blower but half loading area. What is more, this design can be lower installation power and 60% energy saving for quenching.
Delivery:
90 days after received the deposit payment.
Installation, commissioning for 20 days.
Installation:
1-2 engineers for installation guidance, commissioning and training free.
Provide operation manuals, including electric diagrams, guidance of operation and maintenance, main process parameter setting.
Warranty:
1 year warranty.(Warranty start from finishing commissioning.)
Seller will be responsible for the non-artificial damage devices (not including wearing parts), provide technical services and spare parts, and assist to solve the problems during production. Seller should give assistance buyer to solve the problem timely when failures happen.
After-sell Service
Received customer failure report will response rapidly:
1: based on customer's description, solve problem by telephone or E-mail try to resolve issues as soon as possible.
2: If we can't solve machine problem by telephone , our customer service center will promptly sent our technician to customer's factory to supply full solution for solving this trouble.