China Test Package Sawdust Test Package Refrigerator Test Package

Standard (SASO 2664-2007) sawdust freezing load test package for refrigeratorAppliancesThe freezing test package GB/T805 9.2 9.4 for refrigerator cooling test is in accordance with the requirements of GB/T8059.2 and GB/T8059.4 standard. The test package is placed in the frozen food storage compartment and chill compartment's performance test, or in a refrigerator freezer to test the freezing capability test, to simulate the freezing load capacity of frozen food.Features:1. The freezing point of the test package is -1ºC (Its thermal performance is equivalent to lean beef)
2. Packaging material is a thin layer of plastic, or with appropriate materials which can do medium vapor exchange with the environment, immediately seal the packaging material after filling,
3. When measured in chill compartment, must use the-5ºC test package.
4. You cannot useIce Machine in test of testing freezing capacity and load temperature rise time.
5. M package means the 500g test package, it equipped with a thermocouple in the geometric center to measure the temperature. The thermocouple contacts the package directly.
NoteDon't store it so long time on normal temperature ,note the deformation
This freezing load test package is afraid of pressure , fireproofing ,waterproof ,handle with care
This freezing test package need toperiodical inspection ,no visible Holes or slits ,When you find the test package exceeds the above-mentioned error, it need to be change
Reference Standard
ISO15502 IEC62552
SpecificationSpecification and parameters:WeightTemperatureDimension0.25kg-1ºC50mm*50mm*100mm0.5kg-1ºC25mm*100mm*200mm0.5kg-1ºC50mm*100mm*100mm1kg-1ºC50mm*100mm*200mm0.125kg-1ºC25mm*50mm*100mm0.5Electric Contact & Materials kg-5ºC50mm*100mm*10Emergency Light & Indicator Light 0mm0.5kg-1ºC50mm-100mm*100mm0.5kg-5ºC50mm-100mm*100mm1kg-1ºC50mm*100mm*200mm500g-1ºC50mm-100mm*100mm
BND-RT01 Normal Test Package (Standard GB8059.1-4/ ISO 15502/ IEC 62552)
Size(mm)Weight(g)Tolerance of sizeTolerance ofquality 25 x 50 x 100125When length is between 25mm to 50mm, tolerance is ±2mm;
When length is between 100mm to 200mm, tolerance is ±3mm;±2%50 x 50 x 10025025 x 100 x 10025025 x 100 x 20050050 x 100x 10050050 x 100 x 2001000It has two types: -1ºC and -5ºC.
BND-RT01M Test M Package (Standard GB8059.1-4/ ISO 15502/ IEC 62552)
Size(mm)Weight(g)Tolerance of sizeMattress Machine Tolerance ofquality 50 x100x 10050050±2mm
100±3mm±2%It has a sensor hole in thegeometry centerof test packagethat embedded Ktype thermocouple wire.
BND-RT02 Australia standard test package (Standard AS1731.4-2003)Size(mm)Tolerance of sizeDensity(Kg/m3)Tolerance ofqualityEtching Machine 25 x 50 x 100±3%480±80±2%(Quality is calculated by the density and volume)25 x 100 x 10050 x 100x 10037.5x 100x 20050 x 100 x 200
BND-RT03 North American commercial testpackage(ANSI/ASHRAE Standard 72-2005)BND-RT 04 Sawdust package (Standard AHAMHRF-1 2007/ SASO 2664-2007)
Size(mm)Weight/tolerance(g)Density/tolerance(Kg/m3)130 x 100 x 40291±41560±80It wasfilled with hardwood sawdust that has been water-soakedor alternately is to be an equivalent package of frozen food such as chopped spinach.
about us