Theanine Granulation Machine, Starch Granulation, Theanine Granulator manufacturer / supplier in China, offering Theanine Granulation Machine, Theanine Granulator, Theanine Granules, Fruit Dryer, ETFE Granulation Machine and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Piece | US $50000.00/ Piece |
Local Area: | Jian, Jiangxi, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Movement Way: | Combined |
---|---|
Flow: | Mixing |
Heating Mode: | Transmission |
Energy Saving Drying Equipment --Double Conical Vacuum Dryer (According to CE&PED)
1.Descriptions
SZG Series Double Conical Vacuum Dryer is a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. The whole system include double cone with jacket , gearbox ,motor ,rotary joint , instrument gauge ,vacuum system , heat source , control cabinet ,etc…
2.Principle
Raw material with moisture (solvent) feed into dryer , closed the valve ,run the motor , open the heat source valve , Let heat source (for example, low pressure steam or thermal oil or hot water) pass through the sealed jacket. The heat will be transmitted to the inner wall of cone then inner wall transmit heat to raw material , There is a temperature sensor inside the rotating cone , the working temperature can be set on the control cabinet .when the temperature of raw material raised , the moisture (solvent) will evaporate out , under the vacuum condition , the moisture (solvent ) will be removed by vacuum pump ,Under the driving of motor ,the cone is rotated slowly and the raw material inside mixed continuously .rotating time can be set on the control cabinet .
3.Applications
It is suitable for the raw materials that need to concentrate, mixed and dried at low temperature (for example, biochemistry) products in chemical, pharmaceutical and foodstuff industries. It is particularly suitable for the raw materials that are easy to be oxidized, volatilized and have light sensitivity and is toxic and not permitted to destroy its crystal in drying process.
Thermal sensitive raw materials that cannot stand high temperature.
Materials with solvent and dangerous gases to be collected.
Materials that are dangerous and easy to oxidize.
Materials that require low content of volatile residual.
Materials that have special requirements for crystal shape.
4.Technical Parameters
item
spec
name
unit
100
200
350
500
750
1000
1500
2000
3000
4000
5000
total volume
L
100
200
350
500
750
1000
1500
2000
3000
4000
5000
working volume
L
50
100
175
250
375
500
750
1000
1500
2000
2500
heating area
m 2
1.16
1.5
2
2.63
3.5
4.61
5.58
7.5
10.2
12.1
14.1
speed
rpm
6
5
4
4
4
power
kw
0.75
1.1
1.5
1.5
2
3
3
4
5.5
7.5
7.5
rotating height
mm
1810
1910
2090
2195
2500
2665
2915
3055
3530
3800
4180
total weight
kg
825
1050
1350
1650
1800
2070
2250
3000
4500
5350
6000
design pressure inside the tank
MPa
-0.09~-0.096
design pressure of jacket
MPa
0.3
Speed adjusting motor of 0-6rpm might be chosen according to the user's requirements. The following aspects should be point out when to order:
1. The above-mentioned parameters are calculated based on material density of 0.6g/cm3. If it's over, please point out.
2. If certificate for pressure vessel is required, please point out.
3. If glass lining for interior surface is required, please point out.
If the material is explosive, or flammable, the calculation should be made according to trial result.