Spiral Tubeformer, Spiral Tubeforming Machine, Duct Machine manufacturer / supplier in China, offering Mhtf-1500c Spiral Tube Former Machine, Roll Forming Machine, Spot Welding Machine/Spot Welder and so on.
Min. Order / Reference FOB Price | |
---|---|
10 Set | Contact Supplier |
Local Area: | Jian, Jiangxi, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Maximum Linear Speed of Equipment: | 200m/Min |
---|---|
Installation Location: | Zinc Pot After Water Quenching Trough |
Bandwidth: | The Detectable Range Is 0-1350mm |
I. name and quantity:
One on-line thickness gauge for galvanizing layer (model: x-otm2000)
Ii. Technical indicators and functions:
Material tested: galvanized board
Maximum linear speed of the equipment: 200m/min
Installation location: after the zinc pot water quenching tank
Error range: 1g/m (1-300 g/m) double-sided;Note: this device is the only one in the world that can detect 300 g/m and the error can reach 1g/m.
Bandwidth: the detectable range is 0-1350mm
Product size: long: 4000
Wide: 500
Gau: according to the site design
Probe spacing: 35 mm
Galvanized strip through line elevation:
According to field demand.
Equipment operation mode:
Automatic reciprocating detection, single point detection, quick return to zero, independent operation cabinet, using PLC.
The display interface is located in the main control room, and the probe can be displayed at the position of the plate belt.
Thickness data preservation:
The amount of zinc used for storage, the amount of zinc used for storage, and the amount of zinc used for storage;Can be according to the number of galvanized volume query, query shows the thickness curve data storage time is 120 days.Values can be displayed for full-volume queries.
Real-time curve display:
When the c-frame reciprocating primary curve is displayed in real time, and the curve is displayed with the advance and retreat of the c-frame, the curve is automatically cleared after a round trip, the reference line is manually input, and the spacing of the reference line is
5 g/m squared
Iii. Equipment configuration:
One "C" frame
"C" type frame base 1 set
2 probe
One chiller
1 control cabinet
One ipc
1 set of electric PLC drive cabinet
1 set of cables and water pipes
Isolation transformer 500W
Iv. Equipment safety:
There is no X - ray radiation at a distance of half a meter.(this device USES 16WX - ray to achieve a 2mm focus).