China The Q X-T2 Series Submersible Pump

The Q(D)X-T2 series submersible pump
Use and characteristics
The Q(D)X-T2 series submersible pump is composed of a water pump, a seal and a motor. The electric pump has a built-in protection device. The motor is located at the upper part of the electric pump and is a single-phase or three-phase asynchronous motor. The pump is located at the lower part of the motor and is a centrifugal impeller. The volute structure, the double-end mechanical seal is used between the water pump and the motor, and the "O" ring rubber seal is used as the static seal for each fixed seal seal. The whole pump is made of stainless steel screws. The pump is small in size and light in weight, and is suitable for water supply in rural underground pumping farmland irrigation, aquaculture water supply and drainage, garden watering and spraying, hotels and canteen buildings.
Conditions of use
1 electric pump works continuously under the following conditions of use
2. The liquid temperature of the conveying water source is less than 40 °CC
3. The pH value of all stainless steel and stainless steel plastic pumps is in the range of 4-10, and the remaining pumps have a P value between 6.2 and 8.5.
4. The ratio of solid impurities in water is not more than 01%, the particles are not more than 02mm, and the diving depth is not more than 5m.


Model specificationFlowHeadpower VoltagefrequencyPipe diameterSynchronous speed