China The Software Controls The Three-Axis Intelligent Dispensing Equipment

Intelligent | information | convenient | visual

ProjectParameter indexMaximum range of per axis movement
X0~440mmY10~250mmY20~250mmZ0~100mmB±360°±360°rotating shaft of dispensing ironC±360°Angle adjusting shaft of productAxis movement speedX0~800mm/secY10~800mm/secY20~800mm/secZ0~300mm/secB0.1~800°/secC0.1~800°/secPositioning accuracyX/Y1/Y2/Z±0.02mmB/C±0.02°Shaft verticalityX-Y0.1mm/100mmShaft verticalityX-Z0.1mm/100mmY axis platform flatness0.05mm/150mmMotor shaft number6 axis (Maximum 8 axis)Load capacity3Kg(Z axis) 10Kg(Y axis)Drive modeimported stepping motor + Synchronous belt + Linear slide(or servo+ Wire rod)Dispensing functionPoints, lines, pline, circles, arcsProduction dataSupport data upload analysisDevice functional compatibilityFast replacement of the corresponding Z axis module, four axis, five axis and six axis can be realizedDispensing display modeVisualization of dispens joint trajectoryProcessing file capacity16M,The maximum can be done around 18-20M,The files are stored on the serverUpgrade modeSupport online upgradeTeaching methodsAndroid 5.0 padCommunication interfaceUSB/WiFi/RS232I/O input voltage24V DCI/O Output drive current500mAWork environmentTemperature 0-40°Chumidity 20%-80%(Non Condensing)Gas source0.3Mpa-0.6Ppa(Dry gas source)Whole machine power200WWorking power220VAC/50Hz