China Thermal Dynamics Victor Plasma Source AC300xt

Auto-Cut 300 XT

Auto-Cut 300 XT
Mild Steel cut capacity
Production Piercing1¼" (35 mm)
Maximum Piercing1½" (40 mm)
Maximum Edge Start2 ¾" (70 mm)
Stainless Steel cut capacity
Production Piercing1¼" (35 mm)
Maximum Piercing1½" (40 mm)
Maximum Edge Start2 ¾" (70 mm)
Aluminum cut capacity
Production Piercing1¼" (35 mm)
Maximum Piercing1½" (40 mm)
Maximum Edge Start2 ¾" (70 mm) ·





Auto-Cut 300 XT systems deliver premium cut performance on both mild steel and non-ferrous materials. These power supplies are designed for reliable, low cost operation. Features like the XT.-301 consumable parts cartridge and the Machine Status Message Center make these models easy to operate.

The Flexibility to Cut Thick or Thin on All Kinds of metals
XT-301 consumables parts are available for cutting metals from gauge .394" (1.0mm) to a 1" (25mm) palte [1¼" (35 mm) for Auto-Cut 300 XT].. Auto-Cut XT systems with XT-301 torch, is normally operating using economical air plasma and air shield gas for cutting mild steel and most non-ferrous metals. This results in high quality surface finishes and low dross cuts. For even better cut quality on mild steel, Auto-Cut XT models offers O2 plasma cutting capability. For lowest cost non-ferrous cutting and unmatched cut quality, use our unique Water Mist Secondary (WMS®) process with nitrogen plasma and water shield. If heavy non-ferrous cutting is required, switch to Ar-H2 (H35) and Nitrogen shield for premium non-ferrous performance up to 1" (25mm) or 1¼" (35mm) for Auto-Cut 300 XT.
.
Low cost Air-Air cutting advantages
Victor Thermal Dynamics' patented XT Torch Consumable Technology is ideal for cutting from gauge .394" (1.0 mm) to 1" (25 mm) [1¼" (35 mm) for Auto-Cut 300 XT]. Excellent quality cuts will be achieved on both ferrous and non-ferrous materials at higher speeds.
Small heat affected zone and smooth cutting edge surface
Narrow kerf for tighter angles and radiuses at high speeds
Wide low dross parameter windows
Higher arc density for faster speeds without sacrificing cut quality
Faster cuts with Air/Air on Stainless Steel

Auto-Cut XT systems offer maximize productivity with reliability and ease
Productivity
High cut speed to produce more parts per hour
With WMS the cut speed can be up to 3 times faster than with similar cutting systems
Highest kW output in its class
Outstanding parts life
Reduced downtime during parts changes due to the SpeedLokTM cartridge design of the XT™ 301-Torch
Reliability
Exhaustive lab testing and field trials ensure on-going performance and reliability
Technology
Microprocessor controlled to produce the best cut quality
Precision torch design offers the best cut quality in its class
Higher cut speed than H35 with the use of N2/H20 on non-ferrous


Full Featured Gas Control
Both plasma, secondary pressures and flows are precisely controlled at the power supply with individual single stage regulators. Changing from the secondary gas to water mist secondary is simple with the front panel mounted selector switch.


Water Mist Secondary (WMS) optimizes non-ferrous cutting (optional for Auto-Cut 200 XT)
WMS Benefits
. Excellent non-ferrous cut quality using N2 as plasma gas and ordinary tap water as the secondary
. Lowest operating cost
. Dross-free cutting from gauge .394" (1.0 mm) to 3/4" (20 mm)
. Oxide-free cut face surface
. Wide parameter window
. Easy-to-use
. High cut speeds compared to H35 cutting



Rated Output 300 A
Output Range 5-300 A
Output 180 V
Input Volts380V, 3 ph, 50-60 Hz,
400V, 3 ph, 50-60 Hz,
480V, 3 ph, 50-60 Hz
Input Amps 97 A @ 380 V
93 A @ 400 V
77 A @ 480 V
Duty Cycle (@ 104ºF / 40º C) 100% (60 kW)
Max OCV @ 400V425 V
Plasma Gas Air, O2, Ar-H2, N2 @ 120 psi (8.3 bar)
Shield Gas Air, N2 @ 120 psi (8.3 bar),
H20 @ 10 GPH (0.6 l/min)
Power Supply Weight 590 lbs. (268 kg)
Dimensions (H x W x D) 54.9" x 27.5" x 40.6" (1371 mm x 698 mm x 1031 mm)




XT301-TorchTechnologyVictor Thermal Dynamics XT Torch Technology delivers productivity and reliability.
. Keyless consumable cartridges for rapid process changes
. Precision construction insuring accurate re-centering of consumable cartridge after parts change
. Rapid engagement SpeedLock retaining collar
. Liquid cooled consumable parts electrical connections
. Spring loaded leak-less coolant tube design
. Increased cooling of tip and electrode
. Improved life through patent alignment control

Ease of Use
. Fast and easy installation
. Simple set-up and user-friendly gas console
. SpeedLokTM quick-change consumable design
. Easy to identify and troubleshoot problems




Cutting Speed Chart for Auto-Cut XT System

MaterialThickness
(Inch)Speed
(IPM)AmpsPlasma/ShieldThickness
(mm)Speed
(mm/min.) Mild Steel 21 ga. 500 55 Air/Air 1 11500 10 ga. 1903 5460 3/16 1305 3180 1/4 150 100 Air/Air 6 4150 1/2 7512 1960 3/4 3020 720 1 2025 520 3/8 130 200 Air/Air 10 3190 1/2 10012 2710 3/4 6020 1430 1 3525 920 1/2 110 300 Air/Air 12 2790 3/4 7520 1960 1 5025 1300 1-1/4 3535 920 1-1/2 2038 510 2 850 220 2-3/4 470 100 Stainless Steel 16 ga. 350 55 Air/Air 1.5 9750 10 ga. 1004 2180 3/16 605 1450 1/4 100 100 Air/Air 6 3020 3/8 6510 1580 1/2 4512 1260 1/4 60 100 N2/H20 6 1750 3/8 5010 1210 1/2 3512 970 3/4 60 200 N2/H20 20 1450 1 4025 1000 3/4 100 300 Air/Air 20 3020 1 6025 1750 1-1/4 4035 1060 Aluminum 16 ga. 400 55 Air/Air 2 8790 3/16 1005 2360 1/4 100 100 Air/Air 6 2650 1/2 4512 1310 3/4 3520 890 1/4 60 100 N2/H20 6 1640 3/8 5010 1210 1/2 3512 970 3/4 70 200 N2/H20 20 1700 1 6025 1000 3/4 90 300 Air/Air 20 1600 1 7025 1490 1-1/4 4535 1320