China Thermal Insulation Fiber Cement Board Wall Panels Heat Resistant for Office Partition Commerci

Thermal Insulation Fiber Cement Board Wall Panels Heat Resistant for Office Partition/Commercial Building
Information of Wall Panels

Materialcalcium silicate board, eps, cement,sandFireproofA Grade, 4 hours of 1000 degreesEco-friendlyGreen material, 100% no asbestosEnergy savingSpace saving, save areaWind proof75m/s, 270km/hSound insulationSoundproof 46dbCertificateTUV, SGSProduct Keywordseps beton sandwich panel

Advantages of Wall Panels
1. Safety and environmental protection.
Unlike those natural stones that emit harmful gases such as radon, which are not good for human health, the raw materials used for the lightweight energy-saving wall materials of polystyrene particle sandwicMedical Diagnosis Equipment h panels are 100% free of harmful substances and not radioactive. So it is very safe and environmentally friendly.
2. Superior fire performance.
The outer material calcium silicate board itself is a cement-based board. Its fire and moisture resistance performance is superior, and the lightweight core material can also have a fire resistance limit of more than 4 hours at a high temperature of 1000 degrees Celsius, while not emitting toxic. Gas, the overall non-combustibility is above the national level A standard.
3. The thickness is small, which increases the indoor use area.
Polystyrene particle sandwich panel energy-saving wall materials genEngraving Machine erally use 75mm wall material compared with 120 brick wall thickness is 45mm less, that is tSignal Filter o say, the use of energy-saving lightweight wallboard, every 22m, can increase the area of 1 square meters. For a 2-storey 200m2 villa, it can increase the use area by at least 6m2 compared to the brick wall, which is equivalent to a large bathroom!
4. Assembly construction, good integrity.
Because it is assembled construction, it has a three-in-one structure. The board is connected to the board as a whole, and Shopping Bags the impact resistance is 1.5 times that of ordinary masonry. The structure of the polystyrene particle sandwich panel is compact and does not deform. High strength, the overall seismic performance is many times higher than ordinary masonry walls!
5. Moisture proof, waterproof and soundproof.
Experiments have proved that the polystyrene particle sandwich panel can be cemented into a pool filled with water without any waterproof finish, and the back of the wall can be kept dry without leaving traces or in wet weather Condensation drops appear. Can be used in wet areas such as kitchens, bathrooms, and basements. In addition, the cement fibers on the surface of the polystyrene particle sandwich panel and its internal materials have good sound insulation effects.
6. Thermal insulation
The composition material of the polystyrene particle sandwich panel has good heat insulation function, and the composite plate with the same thickness is more than 10 times the heat insulation capacity of the brick wall! Can make indoor ambient temperature more comfortable.
7. Can be nailed.
The polystyrene particle sandwich panel can be directly nailed or expanded with bolts to hang heavy objects, such as air conditioners, with a single-point hanging force of more than 45kg; and the panel surface of the wall panel is flat and smooth without dust, and can be directly pasted Tiles, wallpaper, wood veneer and other materials for finishing.
8. Light weight and fast construction speed.
The density of the 75mm thick polystyrene particle sandwich panel is only 45kg /m2, which is equivalent to 1/7 of the weight of a 120mm thick masonry. Two workers can easily move a board, the construction is simple and convenient, and three workers can complete it in 4 days The wall installation of a 200m2 house has saved a lot of labor costs. Overall, the cost of housing has been greatly reduced.
Performance Index of Wall Panels

Performance IndexContentUnit150mm100mm75mm60mmArea DensityKg/m283664842Bending Damage LoadSelf-weighted multiple≥4.0≥3.0Compressive StrengthMpa≥5.0Shock ResistanceStandard sandbag/time≥5Moisture Content%≤10Dry ShrinkageMm/m≤0.5Softening Coefficient ≥0.8Hanging StrengthN≥1000Heat Conductivity CoefficientW(mk)0.19CombustionLevelLevel A non-ignitableHeat Resistance ExtremeH≥5.0≥4.5≥4.0≥2.5Air Heat Insulation measuredB≥50≥48≥45≥40RadioactivityProduction and marketing use is not restricted, Class A material.Environmental ConservationNo asbestos, no formaldehyde or benzene or any tRefrigerator, Freezer & Parts oxic substances

Contact information
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://www.zhongjingtai.com/