China Thr-Du800 Electric Dental Chair

THR-DU800
Electric Dental Chair

01 down the wooden casesPlug in and lift the dental chair and fold the fine wire.Next, L print D manual induction lamp 03 installation, the interface adopts live reverse button, the line is stable!After that, all the lines are protected by double insulation and put into the arm tube.After that, all the lines are protected by double insulation and put into the arm tube.After the connection, all the lines are covered with double insulation protection, and put into the arm tube.Install water and gas first, and then pay attention in order to prevent electricity.Install water cup accessories and reduce the pan.Install strong suction, weak clothing, 08 3 use lun to specify position.

Use attention:
1.The total pressure should be 0.55MPa.

2. The air pressure of the cell phone should be adjusted to 0.2-0.25MPa, the low speed 0.2mpa, the high speed 0.25mpa.

3. The installation must be first water, gas, and then install electricity to prevent the installation of water and gas.

4. It is better to use distilled water or to install tap water filtration device, and use tap water directly. It is especially easy to cause blockage and damage of valve and diaphragm.

Why to choose us?