China Three Heads Wide Belt Sanding Machine Sander

Three Heads wide belt sanding machine

Standard Specification
1.Aluminum sanding pad, Large contact area ,achieve good polishing effect.
2. Pulley one-piece roller, enhance the overall balance

3. Customized heavy tense cylinder, bold piston rod with better stability

4.Cast Iron Calendering roller seat, pull-down spring extends operating life.

5. Belt swing is adjustable by operating the knob, adjusting the belt swing becomes convenient.

6. The height of worktable can be adjusted according to the thickness of the workpiece.
The machine automatically stop working to protect machines and staff from injury once the material is thicker than setted.

7.Digital Control Panel
Height of processing is adjustable , easy to operate, convenient to learn and train

8.Photoelectric switch blower
Automatically clean the surface dust of the photoelectric switch to avoid crashing caused by dust accumulation.

9.Granite worktable, no deformation, good stability

10.Independent bearing hanging plates to fix the height of roller
Equipped with locating rod ,easy to adjust the height of roller.

11. The first two sanding shelf are equipped with eccentric shaft lifting adjusted by pneumatic turn-over. Can be used to make fine adjustments to the lifting roll to adjust the amount of sanding.
The roller automatically rise to prevent the panels and machines from damaging for emergency stop.

Optional :
1.Sand belt swing blower device,automatically clean the surface dust of the sanding belt in operation

2.Automatic elevation adjustment of sanding pad.(PLC control)

3.Air bag sanding pad, constant air pressure inside. Used for sanding wooden veneered board.

4.The last sanding shelf can be equipped with eccentric shaft .

5.Emergency Stop Switch

6.External cleaning brush roll

7.power break protection device

8.Central power switch

9.Vacuum to the conveyer belt( 5.5kw high pressure positive blower)

10.Adjust the frequency converting speed of conveyer belt.
Parameter

TYPERWS630R-R-RPRWS1000 R-R-RPRWS1300 R-R-RPWorking Width30-630mm30-1000mm30-1300mm Working Thickness2-100mm2-100mm2-100mm Feeding Speed5-25m/min5-25m/min5-25m/minSize of Abrasive Belt650*1900mm1020*2000mm1320*2200mm#1 sanding shelf ø190mm
steel ,11kwø190mm
steel,15kwØ240mm
steel,37kw#2 sanding shelf 85sh ø190mm
rubber ,11kw85sh ø190mm
rubber ,15kw85sh ø240mm
rubber,30kw#3 sanding shelf85sh ø165mm
rubber ,7.5kw85sh ø165mm
rubber ,11kw85sh ø210mm
rubber ,22kw Total Motor Power36.25kw48kw95kwWorking Air Pressure>=0.55Mpa>=0.55Mpa>=0.55MpaSpeed of Sucked Air>=25m/s>=25m/s>=25m/sOverall Dimensions2290*1265*20602290*1675*21002600*2080*2070Sanding Belt (cloth)80/120 /180 Mesh

Reasons to choose Samac:
1: good resources with No.1 quality in China
2: quick delivery
3: excellent after-sale services
4: 24 hours technical support through email or calls.
5: freind partner relationship.
Get the maximum return on your investment with Samach's affordable, flexible and friend machines, designed to help you succeed by delivering maximum
performance!