Deguang-Sealing In Life
Main Technical Parameters:
1)Speed: 150 PCS/min
2)Feeding speed: Max: 35 meter/ min
3)Precision: ≤ ± 0.3mm
4)Bag making type: Three-sided sealed bag, Stick bottom doypack, Concave bottom doypack, zipper doypack
5)Unwind size: Max: Diameter: 600mm width: 1200mm
6)Length: 60mm~350mm (To ensure that the twice hot pressure, drawing max length 360 mm, more than 360 mm in times sent)
7)Width: 50-600mm
8)Used material: Plastic composite films
9)Main transmission structure: The coaxial eccentric type
10)Power supply voltage: 380V, 50-60Hz
11)Power: 50kw
12)Weight: about 6000kg
13)Overall dimension: 13000* 1995 *1870mm(L* B *H)
II, Structure configuration instructions
1)Main transmission control: Using the crank rocker push-pull type connecting rod structure.
A. The main motor: Germany SEW gear reduction motor 1, power 4.0 kw.
B. Frequency conversion control: Japan Panasonic inverter 1, three-phase 3.7 kw.
2)Traction system: Adopting digital AC servo drive control.
A. Former traction: Japan Panasonic AC servo motor 1, power 1.0 kw.
B. After traction: Japan Panasonic AC servo motor 2, power 1.5 kw.
3) Unwind system:
A. Unwind motor: Taiwan frequency motor 1, power 0.4 kw.
B. Frequency control: Japan Panasonic inverter 1, power 0.75 kw.
C. Unwind rectify: Automatic double lines rectifying system 1 set, photoelectric sensor (domestic) 2 sets.
Rectify motor: Low speed PM synchronous motor 1, power 0.14 kw
D. Unwind constant tension: Ningxia magnetic powder brake 1; Japan rotary encoder 1
4). Stick bottom concave bottom and zipper components:
A. ) On the bottom there are two ways:
1. Stick bottom is adopting the variable frequency speed control traction feeding, left, right each have a group of the material feeding post device, the bottom can a two bags.
2. Concave bottom is adopting the variable frequency speed control traction feeding, the main material place after 45 degrees to folded in half, after two groups put by punching the long pushes the bottom, the bottom plug can only a bag.
B. ) base and bottom punching device 2 sets(Die diameter: 16mm); Self-reliance of punching is adopting photoelectric set length work.
C) Independent hot knife with two sets of (customers can customize specifications)
D. )The main zipper is with the speed of the conveying hot pressure thermal bonding
E) The zipper's horizontal sealing side is adopting ultrasonic thermal bonding; Longitudinal zipper is the hot thermal pressure.
F) The longitudinal thermal bonding zipper hot knife (2 group) in length; 640 mm, cold knife length is: 400 mm
G) Zip version with two sets (double zipper 1 set, single zipper 1 set)
H) The bottom materials adopted fold the concave stick by frequency conversion control traction, the way into the set square coincidence, punching and again in the end.
5. Mesa transportation: Taiwan speed-down motor 1, 0.22 kw.
6. Length setting control: Photoelectric sensor (Fu tai) 1.
7. Automatic control system: Industrial computer, 17 "LCD screen, (hangzhou cinda)
8. Temperature control: Using computer centralized control, K type of thermocouple detection;
Total 22 road, PC ± 2 C ° .
9. Pneumatic components: The Shanghai xinyi, the United States Newman, Taiwan and Germany and other brands of guest pneumatic components.
10. Punching system: Punching beam two groups, punching frame with 3 sets, die: Untying 1 pay, round hole 2 pay.
11. The winding device: 1 set. (used for cutting edge material of waste in charge)
12. The seals use longitudinal permutation and combination bridge structure.