China Tin Processing Plant Jig Machine

Jiangxi Shicheng Mine Machinery Factory is a metallurgical mineral processing machinery enterprise which has been specialized in gold coltan and tungsten/wolfram processing plant
The main machines used in concentrate tungsten/wolfram is including shaking table and jig machine /separator
Below the detailed about the jig separator .

JT sawtooth wave jig is one of the device of modern gravity separation equipment. As its strong ability for
high capacity, high range for the different grains, it's widely used in rough and fine concentration for gulch-gold mine, tungsten, tin, hematite ect..

Jig separarator Operation Principle:

tungsten minning machine jig separator is a kind of down-moving saw-tooth-wave jigger. Magnetic reduce motor drives the saw-tooth-wave producer to make different-heart movement through the cam. And the adjustment device will be driven to do alternate motion to make hypocentrum produce the regulation motion to squeeze the water in box move. The water-flow moving goes through the screen to dash the bed stones and the ore to move as sawtooth wave. Then the ore will be fed at the feeding chute. The dropping speed differs for materials with different density to form different layers naturally. The light material will be discharged by the dashing of water while the heavy material will go down through the bed stones to the hypocentrum. Finally, the concentrate will be discharged to finish the jigging.
Also Jig is a new type of energy conservation and highly efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw tooth .Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is of saw tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit serene surface, decrease of lower limit of grain size recovery and large save of make-up water for undersize fraction. Industrial tests carried out of Saw tooth Wave Jig and Sine Wave Jig for comparison showed that the recovery rate for operation of Saw tooth Wave Jig is raised by Sn:3.01%,Pb:1.63%,Xn:2.04% with water consumption being decreased by 30-75%

Jig machine models and Specification:

ModelArea jigStrokeStrokeFeed sizeHutch waterPressute waterCapacityPowerOverrall dimensionsWeightm2mmr/minmmkg/cm2kg/cm2t/hkwmm tJT0.57-10.578.5-12 (M12)60-160< 61.0-2.0≥ 0.31-2.51.51560x 820x 15500.61210-17 (M17)JT1-11.04
< 101.0-2.0
4.0-10.02.21322x 1190x 19150.9JT2-22.288.5-12 (M12)60-160< 102.0-4.0≥ 0.38.0-15.033225x 1550x 21501.63710-17 (M17)JT3-13.310-4780-110< 203.0-6.0≥ 0.110.0-15.05.52662x 2000x 30303.26JT4-247.0-30.050-125< 104.0-8.0≥ 0.11.0-8.07.54240x 1990x 57504.6JT4-2A47.0-30.050-125< 104.0-8.0≥ 0.18.0-16.044240x 1990x 27504.6JT5-24.8615-2580-120< 104.0-10.0≥ 0.110.0-20.07.53940x 2006X25804.8