China Tire Tyre Curing Press with ISO BV SGS

Product Profile:
This press can realize tire loading, shaping, vulcanizing and unloading automatically. Tire can be cooled automatically with post cure inflator. It can adopt two-half mould and segmented mould.
Features:
§ Designed to handle bias and radial tires
§ Achieve optimal tire concentricity
§ Press Availability at benchmark level
§ Reduced wear, longer press life, improved cycle time and uniformity
§ No foundation, easier to maintain due to improved access to the important areas of press
§ Proven energy saving system, saving more 30% than the normal type.
Specification:

NoNameTechnology Parameter1Quantity12 units/group2Cavity quantity2 or 43Tire size10''-21''4Tire section2.50''-6.00''5Max. mold close force120T / mold6Press Oil cylinderModelPistonPress Oil Cylinder300x50, 2 piecesspeed6mm/s7Lifting Oil CylinderSize63/45x1450Speed110mm/s8Heating plate ODΦ900mm9Mold height110-220mm10Green tire heightMax. 450mm11Heating plates space900mm12Center mechanismTr130*4teeth/inch(Tr95*4
teeth/inch)13Mold close speed100mm/s14Shaping steam PressureNot more than 0.3Mpa15Low press steam pressure0.8Mpa16High press steam pressure1.4Mpa17Media inside bladderSteam/nitrogen18Curing tire quantity2 pcs/unit per time. 30 min /pcs,32 pcs/shift19Air pressure0.8Mpa20Pump motor power37KW, 1440rap21Control voltageDC24V

NOTE: Customized press according to your requirements
FQA-Problems of customer concern:
about machine performance quality
1. Q: How to guarantee the quality of outsourcing parts?
A: First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2. Q: Which brand of electric part?
A: Use world famous brands, Siemens, Omron, Toshiba, Schneider, ABB
Customer can specify the brand.
3. Q: Which PLC?
A: Siemens, Omron, Mitsubishi
4. Q: How to control the quality?
A: There are inspectors for inspecting equipment quality and performance, after assembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
about installation
1. Q: When the guide engineer arrive at customer's factory?
A: If need installation on site, engineer will arrive at factory within one week after machine arrived at factory.
about after-sales service
1. Q: What is the warranty time?
A: 2 years after machine arrived at factory
2. Q: How to solve the problem?
A: Within one hour after getting customer' problem, inform the solution way, there are three ways for different conditions. 1, Which can be solved by phone or Email, it will be solved in two hours. 2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem). 3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.
Machine Assembly At Our Factory:
Machine Running At Customer' Factory:
Foreign Customers Visit: