China Tj 2210 Acrylic Cold Mounting Resin for Metallograohy Sample Preparation

Product Description
Item NoDescriptionBenefitPackageTJ-2210A/BAcrylic SetClear general purpose acrylic system,8-15 minute cure time at 25 ºC Powder1LB/12OZTJ-2210A/BAcrylic SetClear general purpose acrylic system,8-15 minute cure time at 25 ºC Powder1KG/800MLTJ-2210A/BAcrylic SetClear general purpose acrylic system,8-15 minute cure time at 25 ºC Powder2.5KG/2000MLTJ-2210A/BAcrylic SetClear general purpose acrylic system,8-15 minute cure time at 25 ºC Powder2.3KG/1900MLTJ-2221A/BEpoxy KingResin:hardener 2:1, 1-2h cured,colorless and transparent1LB/0.5LBTJ-2221A/BEpoxy KingResin:hardener 2:1, 1-2h cured,colorless and transparent2LB/1LBTJ-2221A/BEpoxy KingResin:hardener 2:1, 1-2h cured,colorless and transparent2KG/1KG
Epoxy and Acrylic castable mounting systems are recommended for mounting specimens that are sensitive to high pressures and temperatures.Epoxy mounting systems provide good physical adherence, low shrinkage and
excellent infiltration into pores and cracks.Acrylic mounting systems are typically selected for their short cure times.Dyes and fillers can be added to either system. Dyes can enhance pores and highlight the interface between the
media and sample. Conductive fillers allow epoxy mounting systems to be used in an SEM without additional processing.Fillers can improve the abrasion resistance of all castable systems.
Tips, Tricks & Techniques:
• To get the best results, use a vacuum system to evaucate air trapped in epoxy systems and samples. This reduces or elimates the gap at the sample/epoxy interace, fills pores in the specimen with epoxy and enhances the end result.
• To improve edge retention for acrylic systems, coat the sample in the liquid hardener before pouring in mixed compound.
Payment & Shiping
RFQ
1, Min. Order Quantity
1 piece is OK.
2. How about your technical team construction?
We have professional technicians team with 10 years' experience.
3, What's our warranty?
12 months
4, Ways of payment
T/T, L/C, Pay pal, Western Union
5, Ways of shipment
EXW, FOB, DHL, FedEx, or upon your requirements
6, Are you a trader or manufacture?
We are manufacturer, owns our factory in Suzhou.
7, Can you accept OEM or ODM?
Of course,Logo is also acceptable
8, What is the delivery time?
No special requirements, can be delivered within 3 days. For customized models, delivery time shall be discussed and confirmed according to order
Contact