China Tonlo Grating Ruler The Magnetic Grid Ruler Magnetic Grid Measuring Sensor

GENERAL CHARACTERISTICS Small overall dimensions of the TRANSDUCER. MAGNETIC BAND MP500 is composed of a magnetic strip, whichis polarized at regular distances of 5+5mm and supported by a
stainless steel tape. Extremely easy to mount on the operating
machine.
MECHANICAL AND ELECTRICAL FEATURESMECHANICAL
· Die-cast transducer.
· Double fixing system's transducer with M4 screw thread
or with M3 through screws.
· Liberal mounting tolerances.
ELECTRICAL
· Very flexible power cable.
· High stability of the signals.
· For applications where the max speed is more than 1m/s,
the use of a "special cable" is request. MTS H Reference signalConstant pitch every 5mm (C)
External (E)Pole pitch5+5mmResolution5,10,25,50,100µmAccuracy2±40µmRepeatability±1 incrementCable8 coresOutput typeLINE-DRIVER
PUSH-PULLCABLE (2 meters standard length)Sensor - magnetic band distanceSee drawingsMinimum bending RADIUS 60mm8cores Ø5.3mmPower supply5~28VDC±5%CONNECTIONSLINE-DRIVERPUSH-PULLCurrent consump. without load60mAMAXGREENCurrent consumption with load140mAMAX(5V,RL=120Ω)
115mAMAX(12V,RL =1.2kΩ)
90mAMAX(28V,RL =1.2kΩ)WHITEBROWNREDBLACKPhase displacement90°±5°SHIELD Maximum speed6m/s(MTS H 5)
12m/s(MTS H 10)ORANGE BLUE Vibration resistance100m/s2[10Hz~2000Hz]YELLOW Shock resistance1000m/s2(11ms)
The sensor is normally supplied with a 2m cable.
It is possible to require longer cable, considering the following
maximum available length.
LMAX=10m (sensor cable);
LMAX=100m (2m sensor cable + cable extension 1).
Class of protectionIP 67 DIN 40050/IEC 529Operating temperature0°~50ºCStorage temperature-20°~80ºCHumidity100% not condensedWeight of transducer40gElectrical protectionsInversion of power supply polarity
Short circuit on output port

ORDERING CODEMODELPITCHRESOLUTIONZERO MARKERPOWER SUPPLYOUTPUTCABLECONNECTIONLP5000010034LP5000 = 5+5mm 5 = 5µm
10 = 10µm
25 = 25µm03 =3m( length)
4-=A,B
6=A/A-,B,B-

OUTPUT SIGNALS DIAGRAM

SENSOR DIMENSIONS

ALIGNMENT TOLERANCES SENSOR-STRIP

INSTALLATION AND HANDLING
Tonlo Mechanical Tech co.,Ltd
Tel:0769-81584776
+86-13724353045
Web:www.cntonlo.com
RECOMMENDED MAGNETIC
BAND FIXING
1. Remove grease from the
surfaces by using alcohol and give a finishing touch by using a
dry cloth.
2. Fix the magnetic band.
3. Fix the cover strip.
4. After 48 hours the best dhesion will be obtained.WHAT NOT TO DO
1. All mechanical reworks (cutting drilling, face milling etc.).
2. All modifications of the body of
slider.
3. All mishandling.
4. Impacts and external stress.
5. Expositions to external magnetic