China Top Homogeneous Vacuum Emulsifying Mixer Machine

MZH-V100L top homogeneous vacuum emulsifying mixer

Machine Description
MZH-V100L top homogeneous vacuum emulsifying mixer consists of: oil tank, water tank, vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system. It is the most suitable equipment to produce high-grade skin care creams or other creams product
The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, diminution to the desired requirements. A lighting hole on the pot cover to observe the states of homogeneity. Entrance for spots of material provide possibility to add essence and suchlike materials. Either pour-out the material by tilting the pot or from the bottom, the latter way can make the materials enter the filling machine directly for quantitative filling. Easy to clean.
Control System: The control system is equipped with digital time relay device, so it can adjust time and speed of homogenizer based on different material. All control buttons are concentrated together,clear at a glance.

MZH-VT 100L Vacuum Emulsifying MixerNONameTechnical parametersMain brand1Main potDesign volume: 100LWorking volume:120L 2Material &ThicknessInner Layer:3mm (Mirror: 400MESH)SUS316LMiddle Layer: 3mm;SUS 304-2BCotton insulation is expanded perlite Out Layer: 2mm (Mirror:300MESH)SUS 304-2B3Technical HoleLid with scraper endoscopic hole, feeding hole, Mirror light hole,Vacuum holes, Pressure date, Spices add hole,Reserve hole. Pot Bottom: Discharge hole, Temperature detection hole. 4Stirring WayAnchor agitator stirring scraperSUS316LScraping blade PTFE material, snapping stirring the pot wall, so the material does not stick pot wall mixed.Japan SumitomoThere are two sets of stirring shaft mixing system, forward and reverse mixing, the mixing process can be up and down, left and right roll. Bearing brand NSK.
Bidirection blending,Both Scraping and Middle agitator
with inverterJapan NSKBottom temperature probe bulb to 20mm can accurately measure the temperature of the material. Temperature Sensor.Japan OmronUp-mixing Motor: 1.5KW;ABBUp-mixing Frequency control: 0~63r/minPanasonic5HomogeneousHomogenizer as SUS 316L solid stainless steel material, by laser machining process from several species such as helical vane cavity structure and the special work in strict accordance with Japan beauty he company to produce high precision, strong shear.
Homogeneus on the Top with inverter, and the seal must
be flushed by waterJapan TechnologyHomogenizer Motor :3KWABBHomogenizer Inverter: 0-3040r/minPanasonic6SealingDharma Blue sealed with silicone rubber O-ring Homogenizer using the world famous German high-speed Mchanical sealChina brandKettle with stirring using mechanical seal. 7Heating wayElectric heating, Water test pressure 0.4Mpa,working Pressure<0.09Mpa 8Discharge way1.Vacuum pressure bottom valve discharge
2. Handle wheel pour. Can through Variety pump or Pressure pump discharge. 9Water tankWorking volume: 80LDesign Volume: 100L Inner Layer:3mm (Mirror: 400MESH)SUS 316L Middle Layer: 3mm;SUS 304-2BOut Layer: 2mm (Mirror:300MESH)SUS 304-2BUnder-mixing Motor: 0.75KW;ABB Motor10Oil tankWorking volume: 50LDesign Volume: 75L Inner Layer:2mm (Mirror: 400MESH)SUS 316L Middle Layer: 2mm;SUS 304-2BOut Layer: 1.5mm (Mirror:300MESH)ABB Motor11Vacuum SystemUsing water ring vacuum pump to avoid pump inhale oil, foam etc., causing blockage.China famous brand ZiboVacuum pump Motor: 0.75KW Vacuum suction tube is 304-2B connected. Water consumption of vacuum pump 68L/min 12Electric BoxElectrical control box for the SUS304-2B, Appearance of sand board. Control procedures for manual push-button, easy to operate. Main Eectric elements of world brand; Button by Japan Fuji, Schneider or Omron for Meter and Sensor. One the control panel should be able to adjust and display the stirring speed, The pot temperature, The Temperature of the upper and lower limits control, Emulsification time and slow mixing time settings and other functions.Schneider
/OmronNet weight850kg(only for standard equipment) Power Voltage380V,50HZ. GMP StandardNo platform,no oil and water pot,all the stainless steel contact with material is SUS316L stainless steel. Another place is SUS304-2B.

II. Machinery Main Parts

III. Our Factory

IV. The Main Project

V. After Sale Service
1. Warranty time: One year guaranteed for quality, product whole life service any damage except the wrong operation during warranty. Period is repaired freely, But the travel and hotel expenses should
be count on buyer.
2. Commissioning services: The product's installation and commissioning at the demand side, our engineers will not leave there until get your agreement.
3. Traning Services: Our engineers will train your staff in your factory or video to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
4. Manintenance Services: Any malfunction happened, once you inquiry us, We will reply you within
24 hours.
5. The File: The manual specification, report of the material which used to the equipment and other documents video related to GMP authentication information will be provided by us.

VI. FAQ
1. Q: Are you factory or trading company?
A: We are the professional manufacture of cosmetic machinery in China more than 10years.
2. Q: Where is your location?
A: Company and Showroom located in Guangzhou china, Factory located in Jiangsu and Shanghai
Province.
3. Q: Are your engineer be able to serve in oversea?
A: Yes, we have a lot of experience install the machine in oversea.
4. Q: What is your material of your product?
A: adopt with full stainless steel 304-2b and 316L
5. Q: How does your factory do regarding quality control?
A: Two years spare parts,and full-life service of our machinery.
Our Company to customer satisfaction for the development of three goals: Product quality, Product technology and After-sales service.